Of course, i'm setting the general traveling and printing speeds in "Speed" (70mm/s btw), the fw limits only kick in with manual G0 moves or that one approach move. Limit only offers me two options - "Initial Feed" and "Z Feed". I don't think disabling initial feed will mess up anything, and z feed shouldn't make much of a difference time-wise either since z moves are always less than a fractionvon imitation - Skeinforge
Thank you all! Disabling Limit did the trick: G1 X69.62 Y92.45 Z0.2 F751100.3928 Sprinter is set up for my maximum X/Y/Z/E Speeds, so this should work. Thanks again! -imitation-von imitation - Skeinforge
Hi everyone, as i'm getting my Sells and Skeinforge dialed in and solid, there's one more bug (?) that i haven't squashed. The gcode Skeinforge generates looks like this: ...start.gcode G90 G21 M103 M105 M106 M140 S122.0 M141 S30.0 M142 S0.0 M113 S1.0 M108 S38.0 M104 S237.0 M108 S13.68 and then this: G1 X36.33 Y85.1 Z0.2 F60.0 F60 is way too slow, it can take around two minutes for the headvon imitation - Skeinforge
Here's another solution to it - way cooler and more comfortable. I created a start.gcode that would do a couple G92 E0 before the build and a some other things, like a M109 S240 that Skeinforge doesn't think is neccesary. Cheers!von imitation - Skeinforge
I checked in the gcode, there is a G92 E0 in there - however Sprinter doesn't seem to take notice. What's working for me is this: > Heat up > Get extruder going > Reset > Home > Print I'll try a more recent version of Sprinter or Marlin someday. Now i just need to find a way to print ABS without a heated bed... Thanks!von imitation - Skeinforge
Hi, we've just finished our Sells Mendel build - mechanically at least. Because we haven't gotten the Reprap host software to communicate with the printer on any PC, we're using SF 41 and pronterface to control the printer. There is just one little problem left with skeinforge, that is right before the extruder lays down the first bit of filament, it starts going backwards at ~300mm/min and revevon imitation - Skeinforge