I have the Azteeg X3 with Viki, I try today evening to slice something with kisslicer and print also once with windows and mac. yesterday i have use Slic3r 1.0 and 0.9.8von RapApp - Repetier
I'm using already 0.90 downloaded on the 27.11 I have print the same g-code file, on windows it's fine and on Mac you see on the photo what's happened. So you thing it have to do something with the slic3r settings? Can you give me a tip which settings you mean? I have print different cube with the Mac yesterday but I hear nothing,I also don't see special fast moves on the layer change on the Zvon RapApp - Repetier
Hi, thats me again. After i have fix the problem with the endstops with your help i have the next problem. I´m using the Repetier Host 0.56 for Mac and in each layer i have a offset in Y direction. I have also try Repetier Host for Windows and it works perfekt. Repetier, dosent you support anymore the Host for Mac?von RapApp - Repetier
Im really sorry repetier you were right i have use M502 and after the reset the axis and end stops works fine. But i don't understand where X have the value from. I have never change offset or something like this on the board. So again big thanks to you repetier and maralbvon RapApp - Repetier
I have turn EEPROM off --> set to 0 But it doesn't help also. After then I have set EEPROM 9 back again, no change. Exist a way to reset the EEPROM or the complete board?von RapApp - Repetier
Thanks for answer, I have change this value already to 0. But it doesn't help. The offset parameter is all time the same. When I have set the "go back after homing" (I don't know the right code name on this moment) value to x/y/z 10mm the offset will be the same the x/y/z 20mm or something else. So the x offset? Is a fix value...von RapApp - Repetier
That looks like there will be a X endstop offset. (X-15 or something like that) But my EEPROM say: Tower X endstop offset 0, the same for Y/Z Is in the firmware somewhere a hidden point with offset values that i can't find?von RapApp - Repetier
Hi, i have a problem with my Kossel, i have mechanical endstops pluged on a Axteeg x3 Rev. 1.12 with Viki LCD. My problem is that when i use G28 the axis go home, ok the axis go 20mm down, ok X is going up again 15mm so the hotend is not in the center. //#define SOFTWARE_LEVELING #devon RapApp - Repetier
Heute sind sie angekommen, 3xTWE-04-12 und natürlich gleich eingebaut Beim Einbau habe ich mir schon gedacht: ah du sch*** das ist noch schlimmer als mit den standard teile. Da kann ich auch Kabelbinder benutzen^^ Nachdem ich die aber auf die Schiene gesetzt habe und an den Justierschrauben gedreht habe muss ich sagen das ich echt begeistert bin. Nach dem einstellen KEIN mit Hand oder Auge wahrzvon RapApp - Mechanik
Habe ebene mit IGUS telefoniert, ich bekomme die tage 3 TWE-04-12 Wagen geliefert. Mal gucken was draus wird.von RapApp - Mechanik
Hi, Ich wollte hier einmal meine Erfahrung mit der Igus DryLin T Miniaturführung Baugröße 12mm zum besten geben. Bestellt für meinen Kossel Lieferzeit 6 Werktage Qualität der Schienen ist sehr hoch, nicht verzogen und maßhaltig Qualität des Wage ist ebenfalls gut und maßhaltig jedoch hat er, verursacht durch die gleit Einsätze Spiel nach Links und rechts von ca. 1mm daher ist der Standardwagen nvon RapApp - Mechanik
Hi Repetier, Was ich gerne sehen würde ist das man Pins die man nicht braucht zur Steuerung der Board Kühlung benutzen kann. ich habe z.b. Ein Azteeg X3 und habe nur T0 und TBed belegt, somit T2/T3 und T4 frei. Diese würde ich gerne nutzen um Lüfter die ich an D4/D5/D6 oder D11 an 12v Klemme zu Steuern um die Stepper oder mosfet zu kühlen. Als Beispiel: T2 steuert pwm D4 Lüfter 12v Start bvon RapApp - Software
Hallo liebe Community Ich bin schon seit gut einem Jahr stiller Leser des Forums, doch leider bin ich jetzt auf ein Problem gestoßen dass ich nicht selber lösen kann und mich doch zu Wort melden muss. Es geht um folgendes: Ich habe das Azteeg X3 v1.12 und will die zwei von mir im Moment ungenutzten T3 und T4 die auf pin A12 (T3) und A5 (T4) laufen zur Steuerung der Azteeg Kühlung nutzen. Es sollvon RapApp - Software