Show all posts by user
Printing issues ...
Re: top layer, shell not smooth. Please help - 10 years ago
so, how can I fix it ??by ngocquynh85 - Printing
Re: top layer, shell not smooth. Please help - 10 years ago
I set top & bottom fill = 6. vertical shell = 4. Everything ok, except top & bottom & small point (the ears in picture ). It still have a gaps .by ngocquynh85 - Printing
Re: top layer, shell not smooth. Please help - 10 years ago
the result is better. and I use acrylic for painting. But it not good because it not smooth. =)))by ngocquynh85 - Printing
Re: top layer, shell not smooth. Please help - 10 years ago
I set solid top/bottom layers = 5. and vertical shell minimum = 3, infill = 20%. Yes, the other perimeters are good. maybe I have to set more solid top layers.by ngocquynh85 - Printing
top layer, shell not smooth. Please help - 10 years ago
Hi all, I'm newbie, for few day play around with slic3r, I could print some simple model with good result. But I have some problem with top layer, and vertical shell. It not smooth. You can see in the pictures. So, how can I config for better result ?by ngocquynh85 - Printing
Re: Prusa Nozzle jams after a while
- 10 years ago
replace new stronger cooling fanby ngocquynh85 - Printing
Re: Hotend jamming kapton transparent - 10 years ago
I got the same problem, alway jam after 5-10 minutes running. And after full day check, I done. It jam because the filament too hot in the tube (above the heater), and made the filament melting, become bigger. I bought a new cooling fan. 12V, 0.12A, same with the original fan, but I saw it faster, stronger. After that, my printer work okby ngocquynh85 - Printing
Re: Prusa i3 stopping mid print*video* - 10 years ago
I found my problem. I change orignal usb cable with new, better usb cable, and everything ok again.by ngocquynh85 - Printing
Re: Prusa i3 stopping mid print*video* - 10 years ago
now I have the same problem (by ngocquynh85 - Printing
Re: stepper motor too hot - 10 years ago
Thank you. I found the solution. In mezli board, they set default voltage of stepper motor is too high. (0.8V as I check). And now, I down it to 0.4V, it OK. here's some info.by ngocquynh85 - General Mendel Topics
stepper motor too hot - 10 years ago
Hi everybody, I'm very new member, I just bought prusa i3 (with mezli V2 board) from taobao.com, and everything is ok. But all of the stepper motors is too hot. How can I down that temprature ?by ngocquynh85 - General Mendel Topics