Show all posts by user
Printing issues ...
Page 1 of 4
Pages: 1234
Results 1 — 30 of 108
That was the reason since I started using the bed platform surface which I don't need to use glue or anything to keep the plastic stuck I never cleaned....
Thanks!!!!
by
slanwar
-
Printing
Well everything was working well until I bought cheap filament from Amazon and problems - returned the filament... Then I decided to print something with an ABS from hatchbox and same problem , tried to change the layer height, temperatures, country and galaxy and same problem. I attached the picture.
by
slanwar
-
Printing
Mine after a million calibrations and taking the printer completely apart and start over again is not working that well to the point I prefer to use my prusas. The towers aren't 100% perpendicular and doesn't matter my calibrations but anything over 3 inches wide would be a mess. I will try again when I have more time.
by
slanwar
-
Delta Machines
Actually I am but with no schematics from the board nothing I can do, one thing I learned about this Chinese boards ...stay away from them.
by
slanwar
-
Reprappers
I think this auto level thing is a bit of baloney, all my printers have auto leveling and I don't see any benefit, for me auto-leveling should be able to print in a uneven surface and doesn't, maybe we are doing something wrong but ...
by
slanwar
-
Printing
I changed Z_PROBE_OFFSET_FROM_EXTRUDER value and worked, that's what I do with my other printers so I decided to give a shot.
by
slanwar
-
General
Anybody knows how to change the microstepping on this board?
Edit: Is a MKS Base v1.4 (Changed the title)
by
slanwar
-
Reprappers
I'm ready to try your Z sensor, I have everything except the metal rod I just need to find a bicycle spoke and the piano wire.
by
slanwar
-
General
...didn't work! Actually doesn't matter whats the value I use because always prints about 2 mm above surface, I even use the M502 before typing any code, comparing the 2 prusa I built with a mini kossel - no words!
by
slanwar
-
General
Thanks, I will try when I get home.
by
slanwar
-
General
I have my dc42 installed and does the probes but when starts printing the nozzle is too high and is printing in the "air", the sensor triggers when the nozzle reaches the 1.90 mm high, I can't figured out how to set the distance in my marlin, I have also the Print Bite bed.
by
slanwar
-
General
Received the parts today and they were printed with quality, I love the print bite and I can't wait to test the printer.
by
slanwar
-
General
Do you have a laptop style power adapter or the brick size power supply?
by
slanwar
-
Delta Machines
Check the wire gauges from the bed, I had that problem with my Prusa i3 so when I got my delta I replaced the wires with thicker wires (18 gauge), for the extruder check the thermostat could be a bad contact and is giving you a bad reading.
by
slanwar
-
Delta Machines
Discard my question I went to david's blog and said works fine with printbite.
by
slanwar
-
General
Question about the IR self leveling, the IR doesn't work with PEI - Sensors, so is the PrintBite made with PEI?
by
slanwar
-
General
Just ordered the flex3drive for my mini kossel and I ordered the PB as well, any idea how long would take to get here? Crap I forgot to request a color... give me any color thats not black but if I have to wait then black is good
by
slanwar
-
General
I just ordered the Prometheus V2 hot end, I saw on your list that fits the flex3drive, today my hot end got stuck again and I had to remove the all assembly again so I gave up on this chinese cheap hot ends, is always a nightmare to calibrate this printer.
by
slanwar
-
General
I was checking your site and to order I will have to specify the hotend i'm using and thats my problem righ now, I don't like what I have right now on my mini kossel and I'm not sure if I should buy a j-head or another type (original and not clones).
by
slanwar
-
General
Some impressive printouts but printing for more than 24 hours are the fan mounts part the kit?
by
slanwar
-
General
I had the same experience before with cura but for some reason some printouts came better with slic3r and I start using only slic3r but the thing is you need to fine tune the settings, took me a year to be completely satisfied with my prusa i3
by
slanwar
-
Delta Machines
Anybody uses a Mac? I decided to get a mini mac and I can't find a way to have repetier or pronterface to connect the printer, no serials so I'm lost
by
slanwar
-
Delta Machines
I just ordered the printbite for my Prusa i3 let see how that works.
by
slanwar
-
General
I forgot to ask but will the auto-calibration work?
by
slanwar
-
General
I used 3M 468MP high temperature adhesive transfer tape, hard to use as hell, tried to use the entire sheet so would cover the PEI but end up cutting small strips.
by
slanwar
-
General
They just gave me a few meters not a roll.
by
slanwar
-
Delta Machines
I checked your blog and you stopped for more than a year... let me guess, married? Kids? For your bed you could buy PEI (mine is a 0.8mm thick glued to the glass) which I have on my printer and you don't need anymore any spray, tape or glue to hold your printouts, the flexi3drive sales the building plate which I may buy as well because I need to replace mine after in the beginning I used a sharp
by
slanwar
-
General
I want something thats better than the normal bowden setup which is good for a 3mm filament but not good for 1.75mm, ABS prints ok not PLA...always jamming and I tried different brands of filament, the flex3drive looks like a winner for softer filament. I have a prusa i3 in my garage and I print only ABS but the mini kossel is inside the house and I print only PLA because the fumes.
Thats a big a
by
slanwar
-
General
Page 1 of 4
Pages: 1234