Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 7 of 7
Hmmmm, still an issue bonding the fill to perimeter. Easy to snap it off yet it looks good. I'll work on this issue after getting the robot working.
by
Dana
-
Printing
The issue appeared to be the amount of extruded material. Changing the Slic3R Extrusion Filament Multiplier from 1.0 to 1.10 improved the print a lot, near perfect infill to perimeter and line to line. Increasing it to 1.20 now makes a very solid part.
Given the small printed part I am unsure what the effect would be on a large fill area or thick wall. May cause warping if there is too much fila
by
Dana
-
Printing
Were you able to solve this issue? I'm having the same problem and have tried countless variations with slic3R.
by
Dana
-
Printing
Slic3R rev 1.3.1-dev
I've played around for a bit understanding how to get decent results for various parts. My latest part has holes in it that support other items. With little effort they snap right out of the body. The attached photo shows why, .
This happens even in the perimeter layers, and between perimeter/ the infill. I've tried for quite some time to resolve the issue.
Please respond
by
Dana
-
Printing
I want to delete this message
by
Dana
-
Repetier
I want to delete this message
by
Dana
-
Repetier
Windows 10
Downloaded Repetier Host for the first time ~ 12/2/2018.
Problem - repeteir server was running and needed to be deactivated in the browser and repetier host.
With help from the Repetier-Host forum I got this working. In case other users have this issue see the below sequence of events to follow to get printer working on Repetier-Host locally and not Browser Window. As it turned out I
by
Dana
-
Repetier