Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 3 of 3
SOLVED
It turns out that Repeteir-Host doesn’t like negative numbers and uses the values in Slicer and it's own Configuration/Dimensions fields to magically do the Correct thing. Go figure... There is no Common-Sense interpretation but, changing the values to Positive took care of it.
Thus, using Positive number 31mm and 13mm (versus -31mm and -13mm in Slic3r) puts it all together so it correct
by
hotcoffee
-
Printing
Thanks...
My use of the word, “Below”, refers to the ‘Y’axis. I could have been more clear but, since I did not refer to the ‘Z’ axis, I hoped readers would interpret correctly.
I built these (and other machines) and have CNC machines, thus, very familiar with ‘Z’ axis (and 3D printing).
Having said that, ‘Yes’, it prints 31mm below the bed center’s ‘Y’ and ~10 to Left of bed center’s ‘X’ (whe
by
hotcoffee
-
Printing
Mac OSX Sierra
Slic3r 1.3.0 through Repetier-Host
Printers: Two Prusa's built from kits 3yrs ago
Offset does not seem to be working as expected.
Reference: No problems using Simplify3d.
Having trouble with the offset position - it seems to:
• Correctly goes to Home position (at -13.5, -31)
• Correctly does what my Gcode Script tells it to do (same script I use in Simplify3d)
• Not-Correct;
by
hotcoffee
-
Printing