Show all posts by user

Re: Migbot Prusa i3 Unofficial Support Thread - 9 years ago

Hehe, can i know where to check, sorry as not familar with this. Please await your help

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 9 years ago

Attach is the wiring photo of mine, as my X,Y,Z is moving very nicely but the only things is the extruder reverse way.

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 9 years ago

anyone can help one issue, when connect to computer it extract reverse way. wiring is all check all fine, only this issue left.

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 9 years ago

Try this, don't say i say, you skype him at "leo.t077" this is the faster way, as he have mention to me before his email always have issue

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 9 years ago

check on the thermistor, maybe install wrongly. as alot of stuff all wrong, not surprise. check on extruder too for the wiring as I post above, the wiring color, as the supplier wire wrongly and everythings in mess of mine. Today will start the run again see how.

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 9 years ago

By the way just to say one things, buy anythings check first don't run it first, as to me check try don't rush and play safe is the most important. just to update, just check on the plug and it have spark when put in my tower plug. Do check on that too.

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 9 years ago

I have try to use the temperature at lower too but there is no output or the nozzle jam, I have check with the other company that are doing filament and they say the filament which migbot given is not pure filament so the temperature have to put high and not low, till now i still haven't really start print on the migbot, all these while i been using other supplier machine, which i'm tired of, as

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 9 years ago

Just to update you guys on the mig bot suppliers pla temperature, I know you guys may can't believe, it cannot print at 220 degree, as it should be print at 225-230 depend on the device, as I print at prusa i3 model 230 with glass plate 70 degree, as for aluminium plate sorry it will never stick well with this suppliers one , unless with masking tape or pet tape

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 10 years ago

Did anyone run the test run, today first time run test run, as waiting for the tension spring from Leo, till now haven't get, so purchase from other supplier, I notice that, even after doing home and necessary adjustment, while printing the nozzle will go up itself, as the picture, can someone help see with the setting, as I really don't know the program.

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 10 years ago

Hi jcabrer , as the supplier Leo have told me the wire for stepper motor was wrong, as factory make mistake, I would say better check other part too. just in case.

by evetanlm - Prusa i3 and variants

Re: Open .3dl file - 10 years ago

HI Pal, here is the document which i try to open but can't hopefully there is someone out there able.

by evetanlm - Reprappers

Re: Migbot Prusa i3 Unofficial Support Thread - 10 years ago

Stepper Motor connector wire.

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 10 years ago

you go find steven from the web u buy, he know how to deal with Leo.

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 10 years ago

Follow this picture wire fix on mine migbot prusa and it work.

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 10 years ago

Follow this picture wire if black head

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 10 years ago

Sorry i have to tell you guys one things, in fact there are twi wire that are wrongly, u have to rewire it to fix the burn. I face it once with Migbot

by evetanlm - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 10 years ago

Thanks u Invictus, as does anyone have a idea of better Sensor that can be mount on it, as while printing there will be issue using this sensor, why? Because when you are doing multi printing, the sensor will knock on the other print and it really useless to have this sensor, which i give this up.

by evetanlm - Prusa i3 and variants

Open .3dl file - 10 years ago

HI, I really hope someone can help me, in this topic and appreciate all reply! I would like to know how to open file with .3Dl as i go through the web but those software inside none able to get the job done. Please Please help help! Await any kind person help!

by evetanlm - Reprappers

Re: Pressure advance someone? - 10 years ago

this will help.

by evetanlm - Reprappers

Re: Migbot Prusa i3 Unofficial Support Thread - 10 years ago

This is the Sensor they have send together but the issue is, can't sense the glass plate. maker will only say alu plate is nicer.

by evetanlm - Prusa i3 and variants

Re: Auto Bed Leveling with an Inductive Proximity Sensor - 10 years ago

HI, I new in 3d printing and currently i'm having a new prusa i3 with Proximity Sensor, the issue is this sensor home correct but make my nozzle out of space, can anyone teach me how to move the nozzle to the home correctly, instead of sensor at home and nozzle out of heatbed, appreciate any kind person can tell me!

by evetanlm - Printing

Re: Bed Auto Leveling.. check this out - 10 years ago

HI Alex, As i'm facing an issue, as I having an Prusa I3 from and it's terrible, as the system have the IR Sensor but the system don't have auto Leveling and can i know where can i get the auto leveling system,?

by evetanlm - General Mendel Topics