Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 6 of 6
I think its a stepstick issue, swapped it and its working. I tried playing with the pot however there was no sweet spot.
Any idea why a slip problem due might occur at the (exact) same point in a print every time? print shape was pretty similar on each layer
by
tom_h
-
Slic3r
Hello,
This lighthouse model: http://www.thingiverse.com/thing:19786
I sliced it (a few different times, different settings) and printed it several times, each time there was a slip on the Y at around 5-8mm off the bed, same direction.
I haven't had this happen for ages so I spent a while hunting an issue, the problem still occurred, I scaled the model by 10% and it worked fine.
I guess it
by
tom_h
-
Slic3r
Hi Sublime,
thank you for your help, I feel like such a noob now Yes, this was in fact the problem.
I changed so many variables over the last month I just didnt think about the most obvious things, and to be honest i'm not 100% sure about the toolhead selection in gcode. The two extruders are now working fine.
Would you be able to help me with one more thing, how do you think I could wipe
by
tom_h
-
Firmware - mainstream and related support
Hi Polygonhell,
thank you for redoing the start code for me, I appreciate it.
It didnt sort out the problem unfortunately.
i'm using Marlin, most recent verson.
by
tom_h
-
Firmware - mainstream and related support
Hi, I'm not sure if this is the right place to post... so please move if not.
The problem: When I print from SD card I have to run the extruder first via the lcd panel or console, otherwise the extruder motor doesnt initialise when printing. The axis motors do work - so it is trying to print.
The only way to resolve it seems to be cycling the power, running the extruder through the LCD and th
by
tom_h
-
Firmware - mainstream and related support