Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 10 of 10
Hi I wrote a small program to extract the slic3er settings from at g-code file..and write it to a ini file.. that you later can import into slic3r
it runs sandboxed no install..
give it a try
regards
Henrik
by
Rothestar
-
Slic3r
Hi Kim
We think very much alike I have the same idea of powering down. Think the micro switch should be on the x-axes and the end g code should park the head on x pos 210 well outside print area. So you would print max size objects. You don't need the overrule switch because when it is powered down you can just move the extruder head to power back on the printer.
Henrik
by
Rothestar
-
Ormerod
Har oprettet en facebook gruppe, sammen med en anden, der pt er ved at bygge en ormerod, mød os på: "RepRap Ormerod 3D Printer Denmark"
HIlsen
Henrik
by
Rothestar
-
Denmark RepRap User Group
Hi there
I'm the owner of a reprap pro ormerod.
My question is: is it possible to replace the IR sensor with micro switches? I don't see the point in using an analog signal to determent a fixed position that should be a digital signal.
Bed leveling is not an issue, the lock nut and spring method I is the best and easiest way to do it..
by
Rothestar
-
General
Har i sidste uge anskaffet mig en Reprap Pro Omerod fra RS. At give den betegnelsen Pro, er lige i overkanten.
Men ellers en fin begynder maskine til rimelig pris.
Mvh
Henrik
by
Rothestar
-
Denmark RepRap User Group
Got the new SD card, upgraded the firmware and the web interface... now pronterface connects, made a print. Im happy...
Henrik
Back to printing..
by
Rothestar
-
Ormerod
Got ny first snowman, will get a new SD card tomorrow... Any brand I should prefer ?
Henrik
by
Rothestar
-
Ormerod
Got communication back
M115: FIRMWARE_NAME:RepRapFirmware FIRMWARE_VERSION:0.57a ELECTRONICSuet DATE:2014-01-16,
Did a z axes calibration, worked well. wrote all in the config.g file on the SD card.
Did a reboot but it seem like the board is not reading ti sd card. (change password, but is still the default).
X-axes homeing is not working after I updated the cong.g file. tryed putting some
by
Rothestar
-
Ormerod
I have flashed the RepRapFirmware-058-dc42.bin as descripbed. And it was verifyed by the bossac.exe file...
I used the command bossac --port=COM6 -U true -e -w -v -b RepRapFirmware-058-dc42.bin -R
No I can't ping the board.
I can't get access via the Arduino IDE software either..
So i can not confirm the firmware version...
I tried (just an hour ago, to flash back to the RepRapFirmware-057a
by
Rothestar
-
Ormerod
The last 2 days after work hours I have assembled a RepRap Ormerod from RS (green version). Today I was trying to commissioning the printer. Can't get a stable communication to the webinterface can't connect to pronterface. (printer is not connected, reed tons of posts on the web to se if other got the problems. Can connect withe the ardrino IDE. send commands so I decided to update to the new fi
by
Rothestar
-
Ormerod