Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 13 of 13
if a stepper motor is powered but he doesnt get any signal (or gets the signal to stand still) then u cannot turn it because its power in there...
but u can turn my extruder so it doesnt get any power!
so i think there is something in the software wich disables the extruder motor
by
thePrinta
-
Repetier
what does extruder offset x,offset y and temperatur offset means....they are all set to 0
and dry ru is disabled when the point next to it is blue filled isnt it?
by
thePrinta
-
Repetier
the reason why i didnt wondered about the extruder before was that i thought"printer isnt ready so he sets to dry-rum-mode"....but now the printer IS ready there are no error notifactions but it still deosnt work
by
thePrinta
-
Repetier
the motor itself works and the stepper driver too so it isnt a hardware problem
by
thePrinta
-
Repetier
i cannot use it with manual control of repetier....it doesnt starts at all
by
thePrinta
-
Repetier
NOOOOOOOOOO :'(
Now the fan works and the print gets startet but the extruder doesnt work.....
im using RAMPS 1.4
by
thePrinta
-
Repetier
And thanks that u answered so fast
by
thePrinta
-
Repetier
Ohhhhhhh thaaaaaaanks <3
I love u it works...
are u the person who wrote the programm?
by
thePrinta
-
Repetier
but the fan pin from pins.h is the right one for the hotend(9)...so do i have to change FAN_PIN to something else like 66666 and then change EXTRUDER_COOLER_PIN 9?
by
thePrinta
-
Repetier
#define EXT0_EXTRUDER_COOLER_PIN -1
does i have to change this?
by
thePrinta
-
Repetier
when does the fan starts cooling?
I dont want to test it because it is cooling my hot end so everytime when it doesnt sart cooling but the hotend heats up i have to stop the print.
I have set the configuration of Slic3r to: Keep fan always an. And minimum fan speed 100%, But nothing happens.
Thx for answer
by
thePrinta
-
Repetier
At the repetier host i can Set the fan on/off and set the fan speed and the fan reacts how it should be. But if i start a print the extruder heats up and the fan stands still....
Need help plaese
by
thePrinta
-
Repetier