Show all posts by user
Page 2 of 2 Pages: 
12
Results 31 — 34 of 34
12
Repetier-Host Homing Direction - 13 years ago
Hi When homing my CubeX Y-Axis the head moves in the wrong direction for my home sensor location. It moves towards the from of the machine but my sensor is located at the rear. I've changed the #define Y_HOME_DIR -1 to #define Y_HOME_DIR 1 but now the Y-Axis does not move when Y-Axis homing selected. Any Ideas? //// ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN #by RobGer - General
Re: CubeX + Rambo = Freedom - 13 years ago
Hi James I tried this but no movement when Y-Home selected. I can move Y-Axis in both directions but no movement when homing. Thanks, Rob.by RobGer - General Mendel Topics
Re: CubeX + Rambo = Freedom - 13 years ago
Hi James, Thanks for quick response. I changed #define INVERT_Y_DIR false to true and now the Y-Axis moves in correct direction when homing. The Y travel direction has also reversed so now positive increments cause the print head to move in a negative direction (towards the front of the machine) which seems reversed to me. What I really wanted to do is just change the homing direction to use thby RobGer - General Mendel Topics
CubeX + Rambo = Freedom - 13 years ago
Hi All, I recently purchased a Cubex Trio 3D printer. On paper this printer looks great. Unfortunately the product was released prematurely and as supplied isn't capable of printing a decent part. The best I've managed to print is a blob of melted plastic. When I asked for a refund on the basis that the product does not meet it's published spec, 3D Systems responded by telling me my expectationsby RobGer - General Mendel Topics
Page 2 of 2 Pages: 12
12