sorry guys that post was supposed to be in a different threadby beverageexpert - General
thanks for the cambam post processor I am going to be using one of the ramps accessory pins and m42 to turn on my laser. This would be my on M42 P4 S255 and this would be my off M42 P4 S0 I have tried changing this in your post processor but the gcode does not change. Where would I change this to generate gcode on cambam? I was using inkscape and the unicorn plugin for some gcode generation butby beverageexpert - General
thanks for the cambam post processor I am going to be using one of the ramps accessory pins and m42 to turn on my laser. This would be my on M42 P4 S255 and this would be my off M42 P4 S0 I have tried changing this in your post processor but the gcode does not change. Where would I change this to generate gcode on cambam? I was using inkscape and the unicorn plugin for some gcode generation butby beverageexpert - RAMPS Electronics
What infill do you suggest that I print the frame out of?by beverageexpert - Tantillus
Hello I just noticed that there is an stl for a full printed case I am almost finished with my newest printer that will be able to print this with ease. My question is before I waste any plastic. Is this file current and ready to be built? I am excited at the prospect for printing a printer like this instead of many parts. My new printer will print 16 inches in x y and z so I wonder what othby beverageexpert - Tantillus
thanks I just figured it out it was my molex connector. I swapped it and now it works as normal.by beverageexpert - Sanguino(lolu)
ok sanguinololu 1.3 stepsticks I hooked up my board and have printed close to 90 hours without changing configuration. I took my bot somewhere over the weekend and now has this problem. I get my bot back and hooked up One motor will be moving one way then change direction I tried hitting all the pins with my solder iron thinking it might be connection multimeter says both motors are hooked aby beverageexpert - Sanguino(lolu)
hello all I am looking to build a 3d kiosk I will be using ramps. I have the lcd encoder sd card on the way and I have a raspberry pi. The way I would like for it to work is that someone presses a button that would correspond to a model that would be printed. This would then heat up the platform and extruder then I would like it to print said model and then kick it out. Any workflows that alreaby beverageexpert - RAMPS Electronics
Hello I have a ramps 1.4 running marlin I recently ran out of pla and am now getting printer ready for abs. I have a 18 amp computer power supply and all my motors extruder etc are working. When I plug in the power to the ramps board AND the usb is connected to the computer the d8 heater bed pin stays on. In pronterface it says its off. The thermister is working fine. I tried switching pins wiby beverageexpert - RAMPS Electronics
hello my life situation has forced me to sell my project my sells mendel is 97% complete with the extruder giving me some problems. I just needed to buy a more powerful stepper motor the mendel comes with everything you need except for a hot end and stronger stepper motor i spent over 600 bucks on the parts for the mendel and then I purchased a full ramps set as well so now its over 800 bucksby beverageexpert - For Sale
i forgot to mention I am using sprinter firmware and a arduino mega 2560by beverageexpert - RAMPS Electronics
ok so after a long while I finished my sells mendel. i have ramps 1.4 running pronterface every axis works x y and z but the extruder motor doesnt turn the thermistor and heater work fine and the test cube code works fine except the extruder i have swapped out the stepper driver doesnt seem to be the issue. when i click on extrude 5mm in pronterface it thinks its extruding but isnt is there aby beverageexpert - RAMPS Electronics
Did you get your bushings? I am about to print your imperial prusa set. I only print in pla so I have plenty. Let me know if you still need some bryanby beverageexpert - Wanted
this stuff looks pretty slick. I have a few packs of sugru that I havent opened because I couldn't find it anywhere but now I can just make my own. I would love to see some type of extruder for this stuff. Guess the amount of cornstarch you add shortens the cure time. This seems very doable bryanby beverageexpert - General
If you are printing pla you can use painters tape on foam core and cut the foam a little longer than the build platform. This is how I print wades main body and the x carriages. I used to use foam core all the time but I now print on painters tape directly on the build platform. I find I get quite a few uses out of the painters tape and the parts are rock solid flat. I secure the foam core to theby beverageexpert - Reprappers
2 days left buy it now at 300 with 2 extruders thanks bryanby beverageexpert - Plastic RepRap Parts for Sale
8 hours left good luck bryanby beverageexpert - Plastic RepRap Parts for Sale
back up on ebayby beverageexpert - Plastic RepRap Parts for Sale
# latest set # previous sets I had a buyer that backed out If you would like to discuss price shoot me a pm asap before I relist it thanks bryanby beverageexpert - Plastic RepRap Parts for Sale
Hello fellow fabbers I have completed my 9th full mendel set. Most of the parts are printed on ultimachine pla 4042d on my makerbot #470 They are all perfectly flat I have included the regular drive pulleys and nopheads variant . I have included the z driven pulleys with rims attached . This set includes Wades Extruder and zaggos printruder 2 here is a link to this set and some of my prby beverageexpert - Plastic RepRap Parts for Sale
Its on ebay now. I have also included zaggos printruder 2 with mendel adapter good luck bryanby beverageexpert - Plastic RepRap Parts for Sale
Hello fellow fabbers I have completed my 7th full mendel set. Most of the parts are printed on ultimachine pla 4042d on my makerbot #470 a few are white abs They are all perfectly flat I have included the regular drive pulleys and nopheads variant . I have included the z driven pulleys with rims attached . This set includes Wades Extruder and here objects.reprap.org/wiki/Development:Geared_by beverageexpert - Plastic RepRap Parts for Sale
I just put the set up on ebay This set now includes 4 extruders You get the regular extruder You get Adrians awesome nema 17 geared extruder You get Zaggos Printruder 2 $25 with mendel adapter Let me know if you want the timer pulley or worm gear variant if none specified you will get the timer pulley variant You get Wades super popular geared nema 17 extruderby beverageexpert - For Sale
I just put the set up on ebay This set now includes 4 extruders You get the regular extruder You get Adrians awesome nema 17 geared extruder You get Zaggos Printruder 2 $25 with mendel adapter Let me know if you want the timer pulley or worm gear variant if none specified you will get the timer pulley variant You get Wades super popular geared nema 17 extruder thanks bryanby beverageexpert - Plastic RepRap Parts for Sale
I put them all up on ebay Adrian's Geared nema17 extruder for reprap mendel makerbot Zaggo's Printruder 1 for makerbot or reprap mendel Zaggo's Printruder 2 for makerbot or reprap mendel Wades Geared nema17 extruder for reprap mendel All of them have the same buy it now price as above. If you are going to buy it now please just send me a pm here and we can work it out outside of ebay.by beverageexpert - Plastic RepRap Parts for Sale
i sent you a pm with all the detailsby beverageexpert - Plastic RepRap Parts for Sale
Hello fellow fabbers I have printed quite a few extruders Here are the ones I have completed thus far I figure I would post them here first before ebay Zaggos Printruder 1 $25 this comes with the mendel attachment Zaggos Printruder 2 $25 This 1 has either the dinos for the makerbot or the mendel adapter Let me know if you want the timer pulley or worm gear variant viks mendel extruder $20by beverageexpert - Plastic RepRap Parts for Sale
I thought I should update the pic information Here is a link to 140 photos of my mendel parts # thanks bryanby beverageexpert - Plastic RepRap Parts for Sale
I thought I should update the pic information Here is a link to 140 photos of my mendel parts # thanks bryanby beverageexpert - For Sale
Hello all I have completed my 6th full mendel set. This might be the last set off my makerbot as I have all the supplies for my own mendel. All the parts are printed on ultimachine pla 4042d I have included the regular drive pulleys and nopheads variant . I have included the z driven pulleys with rims attached . I also have printed out the makerbot adapter . It also includes the regular extruderby beverageexpert - For Sale