Thanks for what could bee a most wanted solution for the years old problem. Problems / questions: How to get the Melzi folder to turn up in Arduino -> tools -> boards? Not at all sure on the values Z_HEIGHT_MM; Z_HOME_POS; and how to set them in configuration.h Running Mendel 90 with all nopehead std. since late 2014by bolean - Mendel90
Have experienced problems connect to my Mendel 90 printer from pronterface, and to upload from arduino. problem started om my Kubuntu machine. I found and fixed some software corruption and after manually unmarked and rename some lines in melzi/cores/arduino/main.cpp ; /marlin/SdBaseFile.h and /marlin/SdBaseFile.h that gave error massages in Arduino. After that I was able to upload the skby bolean - Printing
Since the GUI launcher works i am satisfied. Thanks anyway.by bolean - Mendel90
When i start from the terminal no new window opens, instead the process is ongoing in the same window. If I close the window i get no info, if I keep the window open and start slice the result in garbage. The trick seems to be to reset and clear the terminal window before loading the .stl file in the Skeinfoge window Create a launcher in Menu editor seems to me as a better, and safer, way. Hereby bolean - Mendel90
Installed Skeinforge in Ubuntu 18.04 and Debian 9 stretch. Everything seems to work but without any terminal window: Any tips to solve this would be most welcome.by bolean - Mendel90
Sorry a typo. The Z_HOME_POS was all wrong. Now everything looks ok.by bolean - Mendel90
Thanks for a swift reply. It did the trick, and I uploaded the new baudrate, started pronterface and run a testprint. Either the z home point must be changed or something else was wrong. Im a bit short of time now so I reconnected my xp box and reloaded the original sketch. Maybe a stupid question but should the different machines/sketches affect the z home position?by bolean - Mendel90
Installed/kopied Marlin and Arduino according to nopheads instructions on Ubuntu 16.04 and got this error message when trying to upload 115200 baud rate. The Arduino window report: Marlin | Arduino 2:1.0.5+dfsg2-4 and: MelziW/ ATmega1284p 16mhz on /dev/ttyUSB0 The serial connection seems ok. (dont know how to verify). I have tested several different version of Marlin, without any changes. Tried tby bolean - Mendel90
Thank you! I will look in to it tomorrow. Something with the com port, I think it all started when i forgot to turn the printer on before uploading and Arduino complained it couldnt find the com port.by bolean - Mendel90
After upload to melzi, Arduino gives this message in orange text: " avrdude:stk500_getsync(): not in sync: resp=0X30" The meaning of this? Anyone.by bolean - Mendel90
I moved all fies on the SD card to a usb stick using Ubuntu. Only later I was aware of the problem with non-executable folders and hidden files. Now I'm very uncertain if the setting files I use are identical with the one submitted on the SD card and would like to download the SD card files if that is possible.by bolean - Mendel90