The android printed with my upgraded mendel90 is a ful success. Thanks Chris for the upgrade kit. The surface now is silky, before the upgrade is was more shiny. As I have my two extruders for different filaments, I wonder whether it could be possible, to export the calibration data for extruder and Z-Homepoint to a separate file. Furthermore it should be useful, to have a simple procedure forby DocHol - Mendel90
Hallo Gerhard, vielen Dank für die Hinweise. Der erste Druckversuch lief mit PLA und nopheads Einstellungen. Kisslicer habe ich jetzt installiert. Offensichtlich gibt es für die neueste Version vom Mai d.J. noch keine Beschreibung. Hast Du eine Idee, wo z.B. die Option Fan (Angabe in mm) beschrieben ist? Wie ist mit dem Support umzugehen? In der Zeichnung sind z.B. die Hände doch sicherlich zuby DocHol - Uuupps!
Hallo Forum, nachdem ich verschiedene vorgefertigte Modelle auf meinem Mendel 90 erfolgreich gedruckt habe, wollte ich mich nun selbst an einem Modell versuchen. Die Vorlage stammt von Thingiverse, ist in Blender bearbeitet, in netfabb skaliert und mit Skeinforge zum Druck vorbereitet. Den Ausdruck habe ich dann abgebrochen. Vermutlich habe ich eine ganze Reihe von Fehlern beim Slicen gemacht.by DocHol - Uuupps!
threedyprinter Wrote: ------------------------------------------------------- > I slightly modified the stl to make the slicing > cleaner and added ... Indeed slicing is cleaner, but why?by DocHol - Mendel90
Hallo Alex, das Problem beim Öffnen der zu slicenden Datei habe ich auch. Ich vermute einen Fehler im Dateihandler. Bitte versuche doch mal eine Datei, die auf dem Desktop abgelegt ist, zu öffnen. Ulliby DocHol - Software
Trying to print a gear as shown in pict.jpg I got two problems: first the upper edge was transformed to a bubble. Here purposely the extruding temperature was to high, but how to Change? second one edge of the gear is bend to the side. How can I improve this printout?by DocHol - Mendel90
Thanks Gerd, the reason for my problem seems to be a incorrect filehandling windows7(64bit) to Skeinforge. Slicing files laid on Desktop the program works.by DocHol - Mendel90
The first object I tried do slice with skeinforge was the dial_gauge, which worked well. Trying now to open another file, skeinforge askes one more time for the files name and then it slices the dial-gauge-file again. Where can I find the mistake? How can a new file be opened?by DocHol - Mendel90
I think about adding a rasperry Pi to the Mendel90. By this way it is possible to administrate the printer located in the basement by WLAN without the need of another pc. Did anyone try this before?by DocHol - Mendel90
Did anyone think about a housing for Mendel90? As I read there possibly should be some risk for personal health by smelling nano-particles generated by melting ABS. Furthermore the housing purposely could improve the printing-results by a higher temperature of the air around the printout. At least, if anyone does not like the smell of ABS, an exhauster can be added.by DocHol - Mendel90
Silly mistake. As in former threads to be found the correct profile for skeinforce is ABS for printing PLA. Now it works. Just one layer is not ok. Do You have an idea why?by DocHol - Mendel90
Thanks for Your hints. As You suggested to improve the bed levelling, I tried to get a GCode for the clamp.stl. As descripted in Nopheads manuel I installed Skeinforce. The I tried to produce a G-Code. It seemed to work, but there is a mistake with speed. Ooze free start is correct, but after then speed is much too low. From the start point to the printing position Mendel90 moves at say 1mm/sec.by DocHol - Mendel90
Thanks to nophead for this wonderful machine. It's real fun to see it work for the first time. As an absolute beginner I got some questions, I hope You won't smile about them. I added the first print. There were some mistakes as You can see. The second one was better, without any changes to the printer. But there is a problem with the first layer on the left side. The left border seems flowingby DocHol - Mendel90