Yeah, it's a RC helicopter tail fin for my nephewby Wesslie - Mendel90
Thanks! I tried the bed leveling tool and now the bed is perfectly leveled and I don't need a raft or anything it sticks very nice! Finally I can print again!by Wesslie - Mendel90
@Nophead, I will set the flow rate higher and make sure the HB is leveled or maybe even lower the nozzle in SF, thank you! @RyanMark, I am using the 0.3mm PLA settings in SF from Nophead, that should work, thanks!by Wesslie - Mendel90
Tnx guys for the quick responses! @ Nophead I actually print on sanded Kapton tape with a raft because all the print got loose when I printed on the plain glass. But I will try it again on plain glass haven't done that yet with the new settings. @ Traveltrousers Checked my HB and it is leveled. If the plain glass doesn't work I will try PVA juice on plain glass. I will post a picture on mondayby Wesslie - Mendel90
Hi everybody, I really can not get my head around this. Everytime when I print larger objects with PLA I have to warm my sanded kapton hotbed to 110 degrees to make it stick for the whole print. And after laying down a base layer at 200 degrees I continue with a second layer at 185 degrees which goes well but the third layer constantly fails somehow. It does not seem to have enough grip on the pby Wesslie - Mendel90
I was wondering what are the most common printed parts to break from the Mendel 90? Luckily I do not have the experience of any parts failing or breaking, but just to be sure I thought it would be handy to print some spares. Any suggestions?by Wesslie - Mendel90