Hi John, which material is transparent for electrons? You can't use electron beams in air because of the absorption of the electrons on the fly ... and solid materials are even more dense, so the electron won't pass the surfacevon VDX - Powder Printing and Selective Laser Sintering
... etwas zu früh gefreut Ich habe das Teil mit einem Dummy-Widerstand angeschlossen - es hat eine Macke: alle Komma-LEDs leuchten, so daß du nicht erkennst, was für eine Temperatur er nun genau anzeigt Es ist dieser Temperaturregler von RS - ich habe momentan keine Zeit nachzuschauen, ob ich die Kommastellen hinbekomme, könnte ihn dir aber shicken, wenn du dich drantraust ...von VDX - Mechanik
... ich suche heute Abend die Anleitung raus und schicke dir ein Foto und die Infos dazu ...von VDX - Mechanik
Hi Wolfgang, ... willst du evtl. doch das kleine Temperaturregler-Modul haben? Da klemmst du einen Temperatursensor dran und die Schaltausgänge gehen dann auf ein MOSFET oder SSR, das den Heizstrom durchschaltet - die Regelung ist dann unabhängig von der Software auf +/- 1°C genau ...von VDX - Mechanik
Hi Wolfgang, hast du schon Adrians neueste Version von Gestern? ... evtl. siehts da schon anders aus ...von VDX - Altes Forum
Hi John, ... the electrons will heat the surface of the powder and along the complete path too before intersecting, so a 'deep' engraving/heating as with a laserfocus in glass won't be possible A vacuum-chamber and an electron-gun salvaged from an old tv would be posible, but the complexity is something more than with a diodelaser and the benefits aren't so clearvon VDX - Powder Printing and Selective Laser Sintering
... i have two temperature controllers from Watlow which can drive any current until 25 or. 50 Amps and PID-controlling the end-temp with +/-1 deg. or better, so an ambient temperature created by a heated bed and/or additional heaters at the surrounding walls/ceiling around the building area aren't a problem. The only complexity comes from the heat-tolerance of the electric/electronic parts in tvon VDX - Powder Printing and Selective Laser Sintering
Hi Mike, ... i don't have any problem with mixing tools and methods - my device is usable as CNC-lathe or normal turning lathe, it's the additive tooling and software, what's making the difference. I built it as experiment with 2-/4-side-milling and for lathe my optical heads, but essentially it's 'only' a 4th axis on my CNC-mill ...von VDX - Kartik M. Gada Humanitarian Innovation Prize
... some ten years ago we had some brainstorming how buildings or smaller objects will be built in some years - my idea was a swarm of small robots, building 50mm high hollow boxes representing the later walls ... and other bots pour hardening material in this boxes, so they solidify to the building-structure. You can embedd some inner structures/tubes for wirings, other support or water, and sovon VDX - General
... i used it for testing as UV-curable paste for 3D-printing with a paste-dispenser (in contrary to a FFF-extruder)von VDX - Polymer Working Group
Hi John, ... its true, i have all this brilliant bits/tools here, waiting to be used ... but beside my dayjob and family-business simply not enough time bringing this to a short end Im working on 3D-RP and associated themes (with some delays and sidetracks) since 1986 or so, but the last 3 years its something speeding up ... so there is some hopevon VDX - Powder Printing and Selective Laser Sintering
... i've used "Acrifix192" - its a MMA-glue, hardening to solid PMMA with UV (fast) or ambient light (within hours) ... no need of heatingvon VDX - Polymer Working Group
... for IR-sintering you can use an highpower aerial IR-lamp from distance or NiCr-wires floating close over the surface. You have to apply enough heat for melting the topmost surface of the powder, so it melts to the solid object too. I found two glass-tubes with embedded NiCr-wire in a toaster, which should be powered in series by the powerline (230VAC). The tubes are maybe 10mm in diametervon VDX - Powder Printing and Selective Laser Sintering
... or add to/from RepCNCLathe ...von VDX - Kartik M. Gada Humanitarian Innovation Prize
... for 2D-DXF exporting-importing issues you have to check the aimed ACAD-version compatibility - i have best experiences with ACAD14/ACAD2000, but even then you have some incompatibilities with curves ... either splines or beziers or polygons 3D-DXF is even more version-dependant ...von VDX - General
Hi John, ... as i use a CNC-mill for my paste-dispenser and the laserwork, i can combine all of the technologies - imagine the paste-dispenser or FFF-extruder outputting a 'coarse' sheet, the millhead or lasermodule finishing the contours and heighth to lets say 0.01mm accuracy and an aditional powder-dispenser and the laser as sintering/melting device embed some metal-structures inside the plasvon VDX - Powder Printing and Selective Laser Sintering
... zum 'Reinstecken' könntest du dir einfach ein 0.5mm dickes Messingröhrchen ein paar mal um die Lötkolbenspitze wickeln, Außen isolieren und da etwas Luft durchblasen ...von VDX - Neue Ideen - Archiv
Hi Wolfgang, > Aber wie hast du den umgebaut ? Ohne den als > Lötkolben unbrauchbar zu machen ? ... da ich ihn nicht mehr als Lötkolben brauchte, habe ich alle 'Innereien' entfernt und nur noch die Heizpatrone dafür verwendet Falls du sowas suchst, habe ich noch zwei Lötkolbenpatronen - siehe in diesem Post im angehängten Bild links die beiden gelben Zylinder ... den kleinen 30Watt könnvon VDX - Neue Ideen - Archiv
Hi Wolfgang, ... für sowas und fürs Heißluft-löten hatte ich mir mal einen normalen Weller-Lötkolben so modifiziert, daß ich ein Edelstahlröhrchen in die Heizpatrone eingesetzt und da etwas Luft durchgeblasen hatte. Als Düse konnte ich vorne diverse Edelstahl-Kanülen draufsetzen, so daß ich Heißluft mit Düsen von 0.2 bis 1mm auf Teile oder Oberflächen blasen konnte. Das ging soweit, daß ich davon VDX - Neue Ideen - Archiv
Hi Wolfgang, ... diese 'weißen Stellen' bekommst du wieder schwrarz, wenn du sie heiß machst - entweder kurz mit einer Feuerzeugflamme drübergehen oder ein Mini-Heißluftgebläse organisieren/zusammenbauen ... das könnte auch den Finisch verbessern, wenn die Oberfläche mit den Rillen nochmal kurz aufgeschmolzen wird ...von VDX - Neue Ideen - Archiv
... der interessante Punkt ist eher, was ihr mit dem Aufbau später machen wollt - sowohl für höhere Genauogkeit als auch für größere Kräfte (z.B. 'Dremel'-Fräse) braucht man deutlich höhere Dynamik als mit NEMA-17 und 0.4Nm zu erreichen ist. Meinen ersten Rollenplotter und den darauffolgenden A3-Flachbett-Laserplotter hatte ich mir mit NEMA-17 etwa 0.3Nm aufgebaut - als ich nicht mehr schnellervon VDX - Altes Forum
Hi Bob, ... mit einem 'guten' NEMA-17-Stepper, der etwa 0.4Nm Drehmoment hat, wirst du bei eienem Eigenbau mit Schubladenführung oder Klemmrollen meist recht schnell an die durch die Reibung und Klemmkräfte definierten Grenzen stoßen Ich habe schon einige Plotter und 3Achs-Systeme aufgebaut, mit NEMA-23 bzw. 1Nm habe ichs immer irgendwie hinbekommen, mit NEMA-17 und 0.2Nm nur mit perfekten Fühvon VDX - Altes Forum
... NEMA-23-Motoren mit etwa 1Nm Drehmoment gibts um 30 Euro bei Nanotec bzw. billiger bei den Shops - NEMA-17-Motoren sind meist zu schwach ...von VDX - Altes Forum
... M8 ist eher eine Gewindestange mit M8-Gewinde, also 8mm Außendurchmesser Für den Aufbau des Rahmens würde ich von Alu abraten, ist viel zu elastisch ...von VDX - Altes Forum
... it's the desired resolution against complexity of beamshaping methods whats interesting here. With lamps, blinds and lenses i'll receive a spot of maybe 1mm diameter or a parallelized beam of 50mm diameter and a blind or beamer-optics for the cured zones, where the resolution can be something between 0.3 and 0.05mm - the finer, the expensiver ... With a laser i have smaller spots - 0.2 to 0von VDX - Powder Printing and Selective Laser Sintering
... you can apply lower-temp thermal fuses when positioning them not directly near the heating zone ...von VDX - Plastic Extruder Working Group
... using carbon nanotubes can result in same problems as with asbestos, as they're fine enough to penetrate every filter and the biological implications aren't researched clearly When last tried, i used glass, stone and alumina microspheres (solid and hollow) in waterglass or polymer - the mixing isn't the problem, but the solid microspheres can sediment and the hollow ones can float up, so thvon VDX - Polymer Working Group
... my 5Watt-diodes hawe 975nm and the fiberlaser 1070nm, so any black/dark colour will work, but i don't know if the aerosol "clear coat" will work - most clear polymers i used, weren't burned away by the diodelasers ...von VDX - Look what I made!
... für eine Füllung mit "Mineralguß" benötigst du etwa 6% bis 8% Gießharz und das Füllmaterial ist Sand in verschiedenen Körnungen bis zu kleinen Kieseln. Einfacher Sand aus dem Sandkasten oder vom Strand geht auch, ist dann halt nur nicht so Super-druckfest. Um es leichter in kleine Öffnungen reinzubekommen, kann man auch Mikrospheres nehmen - dafür gibts bei Siltrade z.B. Glaskugeln in allenvon VDX - Altes Forum
... du bist nicht auf Papier beschränkt - gib die Konturen als Vektorfiles aus, lade sie in ein CAD/CAM und fräse die Falzlinien mit einem 45°-Sticherl und die Schnittkonturen als Durchfräsung in 3mm-Dibond und du hast einen stabilen Körper mit einer Aluminiumhülle ... Dann ist das Ausgießen nicht mehr unbedingt nötig bzw. ergibt mit einer Füllung aus Mineralguß echt stabile Rahmen und Gehäusevon VDX - Altes Forum