I figured it out. The eeprom was not updating. i had to manualy change heat bed manager to 2. All is good now.by Kryoclasm - Repetier
So I double checked my firmware configuration. It is set for heatbed relay 6000ms. Why is it that it keeps clicking on and off about 3 or 4 times a second? Thank you for any help. Ramps 1.4 latest repetier firmware repetier host software control.by Kryoclasm - Repetier
Let me see if I got this right, $220 for just a linear motion kit and ball screw and there is no prototype? Just asking? You really need to make a full prototype Delta and Cartesian and show them in use. Demonstrate why yours are better. Folks need to see it in action! Another thing, the video just screams "go away". To do a good video, show prominently, a working prototype. You can narrateby Kryoclasm - Crowdfunding Projects Announcements
I see, after matching up the datasheets of both the AD595 and AD597, ironically, it would seem that the AD597 will report a more accurate temp than the 595 using your coding implementation. I guess a new implementation for the 597 is not needed. Due to the fact the AD597 will work well within the temperatures we are concerned about, I would recommend appending the the 597 selection to your coby Kryoclasm - Repetier
I would bet that the stepper shaft was made in China. They are not known for high quality steel. Either there are too many impurities in the steel or it was not tempered to the correct hardness after machining / hardening process, that would leave a lot of tension in the crystalline structure. Try to run a file across it and see what it does. If it won't bite and remove material, then it is tby Kryoclasm - Mechanics
Hello, I was interested in adding support for the AD597 thermocouple. To do this I need to know where to define it in the Repetier firmware files. Also, i need to know the format that is used. Any help would be appreciated, Thank you.by Kryoclasm - Repetier
If I did that, then sensitive peeps will want to remove my printer because it would become racist.by Kryoclasm - General
It will be all gloss.by Kryoclasm - General
Designing a paint scheme based on the movie District 9. Gloss white base, gloss black zones, gloss construction orange accents. Anyone thinks it is... Good? OK? Awful?by Kryoclasm - General