Hi, Also beim Echinus Board haben wir die Hyroglyphen dadurch behoben, dass wir die LCD Library durch LiquidCrystalFast ersetzt haben. Die normale LCD Library schreibt auf das Display ohne Antworten des Displays zu beachten und kann dadurch das Timing falsch handhaben. Mit LiquidCrystalFast waren die Darstellungsfehler dann weg. grüßeby Domonoky - Elektrik & Elektronik
That trinamic chip is very nice, although not cheap. Would also fit perfectly for a 3.3V Arduino Due compatible Shield with 3.3V DICEs. Thank you for the hint. Dominik - 2PrintBetaby Domonoky - Controllers
Oh, you are correct. Thanks for noticing this copy&paste error. I just checked the datasheet for that chip and our internal documentation again, and according to the calculations ist should be 2.4A RMS with 3A max. We should probably do some load tests in the next days to find out the real max (not only calculations) with and without activ cooling/heatsinks. thanks 2PrintBeta - Dominikby Domonoky - Controllers
Hello, Another point for why we choose 5V and the Arduino Mega is, software compatibilty. With a Arduino Mega based shield nearly all opensource 3D printer firmwares can be used unchanged. For the same reason, the default stepper drivers (DICE-STK) use the step/clock interface and not SPI. SPI is optional for other, more intelligent DICE boards. But it should not be too hard to create a futureby Domonoky - Controllers
We, the 2PrintBeta Team. just started our first Indiegogo campaign. The campaign plans to create and produce an new, RAMPS compatible, 3D printer electronics. The BAM Shield plugs into a Arduino Mega and provides PIC-E based slots for the stepper drivers. This allows the stepper drivers to consume much more current, and as there is also I2C, SPI and other bus systems on this connector, it isby Domonoky - Crowdfunding Projects Announcements
We just started our Indiegogo campaign for BMA&DICE a new, RAMPS compatible, electronics. This electronic, supports much powerful stepperdrivers and also allows to plug in many more different driver pcbs. The standard DICE will be the DICE-STK which allows up to 3A RMS to the steppers and up to 128x substepping for extra precision. If you are interested take a look at: The whole proect wilby Domonoky - Controllers
Hello, Thank you for resending the email. I don't know why i didn't find your response in my archive, it must be some technical problem. The email adress is correct. The replacement we would offer, is of course free of charge and with free shipping. We apologie for any problems you got with the defective product. If you don't want a replacement, we can also refund you the cost for the filamenby Domonoky - For Sale
Hello, we apologies for any defective product you got from us. We of course offer free replacement for that. Can you please tell us how you tried to contact us "serveral times" ? I just checked my email archive, and it seems we never got your complain. Please send those emails again. kind regards, 2PrintBetaby Domonoky - For Sale
Hello, we are proud to announce that we are now able to sell improved casted prusa parts in our shop a www.2printbeta.de for only 69.95 €. The parts are cast mostly out of smooth cast 325 and the temperature critical parts are made with smoth cast onyx slow which can resist a temperature of up to 120° C. The casted parts have nearly all holes already cast in and the the leftover holes are drilby Domonoky - For Sale
Hello, we are proud to announce that we are now able to sell improved casted prusa parts in our shop a www.2printbeta.de for only 69.95 €. The parts are cast mostly out of smooth cast 325 and the temperature critical parts are made with smoth cast onyx slow which can resist a temperature of up to 120° C. The casted parts have nearly all holes already cast in and the the leftover holes are drilby Domonoky - Plastic RepRap Parts for Sale
EDIT: Due to stability concerns in the chat, we revoke this offer, till we solved the problems.by Domonoky - For Sale
EDIT: Due to stability concerns in the chat, we revoke this offer, till we solved the problems.by Domonoky - Plastic RepRap Parts for Sale
Hi, we got a new shipment of cheaper PLA grade 4043D. This new PLA is available in red and yellow for only 25.95€ for 100m or 65.95€ for 300m. Check it out at www.2printbeta.de If you have any questions, feel free to ask me.by Domonoky - For Sale
Hallo Leute, jetzt muss ich mich hier auch mal vostellen... Ich bin der Dominik aus Augsburg und habe einen Rapman bei mir am Laufen. Zusätzlich hab ich bei einem Kollegen in Konstanz nen normalen Mendel am Drucken. Auf www.ifeelbeta.de könnt ihr schauen was wir so drucken. Als nächstes wird wahrscheinlich nen Huxley aufgebaut, so als portable 3D Drucker zum mitnehmen :-) grüße,by Domonoky - Schwarzes Brett
Update: Our newest addition, Huxley sets for sale. Take a look at www.2Printbeta.de. If you have any Questions, feel free to send us a message.by Domonoky - For Sale
Update: We now also have Huxley Sets available. Currently Huxley and Prusa Sets are in Stock. Normal Mendel sets will come back in the next time. If you have Questions, feel free to send us a message.by Domonoky - Plastic RepRap Parts for Sale
Update: We also now also have a much cheaper Prusa Mendel RP Kit for sale in our shop. Take a look at: www.2printbeta.de If you have any questions, feel free to ask me.by Domonoky - For Sale
Update: We now also have a Prusa Mendel RP kit for sale. This kit is much cheaper then the normal mendel set. Take a look at www.2printbeta.de If you have any questions, feel free to ask..by Domonoky - Plastic RepRap Parts for Sale
Hello Community, Since a short a short time, we now also have a Mendel RP parts set in our shop. Take a look at: www.2printbeta.de The set includes all RP parts needed for a Mendel. You can choose between different extruder parts, standard mendel, Wades extruder and a modifed Wades for a BfB type hot-end. The mendel parts are slightly modified so the mendel has now feets for a better access toby Domonoky - Plastic RepRap Parts for Sale
Hello Community, Since a short a short time, we now also have a Mendel RP parts set in our shop. Take a look at: www.2printbeta.de The set includes all RP parts needed for a Mendel. You can choose between different extruder parts, standard mendel, Wades extruder and a modifed Wades for a BfB type hot-end. The mendel parts are slightly modified so the mendel has now feets for a better accessby Domonoky - For Sale