Thank you so much @Dust that worked perfectly.by appjaws1 - OpenSCAD
I needed to create a 9 sided cut out, with rounded points, from a cube. The following code works and displays correctly using F5 but useing F6 just produces a solid object. What an I doing wrong? height = 10; //height radius = 35; angles = [40, 360]; fn = 9; tol = 0.2; a = 180 / fn; r = radius / cos(a); module round(){ difference(){ cylinder(h=height,r=radius+1); translate([0,0,-tol])by appjaws1 - OpenSCAD
union(){ difference(){ import("D:/Core XY/D-Bot_latest/files/1-Hotend_Clamp_E3Dv6.stl",convexity=10); translate([0,0,-0.5]) cube([50,20,43]); translate([0,20,4]) cube([50,30,43]); } translate([13,23.5,0]) cube([15,12,4]); //fillin } Using F5 this displays properly but F6 render just ends up with the fillin and no Hotend clamp/ This is the error ERROR: CGAL error in Cby appjaws1 - OpenSCAD
Has anybody any experience with this 3 colour hotend? 3 In 1 Out Hotend Three Color Switchingby appjaws1 - General
I wanted to try this but could not find a windows installer so thought I would contact @GilesBathgate but couldn't find out how.by appjaws1 - OpenSCAD
Thanks again for the information. I see that some heater channels on the expansion boards are active high, are any of the heaters bed, hot end, or fan outputs PWM active high on the main duet 6 board? thanks for your helpby appjaws1 - Duet
Thanks for the link, I had already looked at that and have ordered a 74HCTo2. Can I use the bed heater or the extruder heater or the extruder motor instead of heater 3? If so what do I enter in config? Thanksby appjaws1 - Duet
I have bought this laser and control module and need help to connect it to a duet 6 for the best results. What do I need to include in config file. thanks for any helpby appjaws1 - Duet
The 3.3 rail is measuring 3.24 volts no chips are getting hot at all. If you would like (and have the time) I could send you the board, it would be nice to know what has failed. again thanks for your help.by appjaws1 - Duet
Thanks, Already tried different USB cable and another port on the computer - no change ATSAM4E is not getting hot I haven't checked the solder joints of the USB connection because I have the same symptoms when connecting with 24 volts so no connection to Web control. - not sure that is relevant so will take the board off and check. Did notice an increased number of times during the last week wheby appjaws1 - Duet
Thanks David, I followed the instructions from the link and I can not get the computer to show a USB connection. All of the lights are correct as indicated in the link. So does this mean that the board is faulty or can I try something else? Appreciate all of the help Paul I also noticed yesterday that the blue WiFi light went out so I lost connection.by appjaws1 - Duet
The CONN_LCD and CONN_SD are reversed from what is shown on the diagram. So on the group marked CONN_SD I have the following meter readings Pin 1 +3.24V Pin 2 0V Pin 3 +2.95V Pin 4 0V Pin 5 +2.95V Pin 6 2.95V Pin 7 +2.95V Pin 8 2.95V Pin 9 0V Pin 10 2.95V So this is the CONN_LCD block Having connected the external drivers to the wrong block I seem to have lost my 5 Voby appjaws1 - Duet
I have a Duet WiFi Prototype board (white) and am confused as to the correct connections to CONN_LCD. I have been using the Duet WiFi Connections - Prototype V2 diagram from duet3d.com Jan 2017 As far as I know this is the correct diagram for my white board. However, The diagram indicates that the CONN_LCD connections are the second block from the bed thermistor connector and the +3.3V as the upby appjaws1 - Duet
Issue solved. I was printing inside out instead of outside inby appjaws1 - CoreXY Machines
How can I get rid of this banding issue? This object was sliced using Simplify3D. To me the quality of the banding surface should be the surface of the whole object. Any suggestions?by appjaws1 - CoreXY Machines
Hi all, I need to buy the ormerod hobbled nut for the standard extruder but I can't seem to find any. Can anyone help pleaseby appjaws1 - Ormerod
Hi, I have modified my core XY to use a separate moving extruder platform so I have set the drive as shown:- M569 P0 S0 ; Drive 0 goes forwards X1 motor M569 P1 S0 ; Drive 1 goes forwards X2 motor M569 P2 S0 ; Drive 2 goes forwards E3 M569 P3 S0 ; Drive 3 goes forwards E2 M569 P4 S0 ; Drive 4 goes forwards E1 M569 P5 S1 ; Drive 5 goes backwards Y motor change dby appjaws1 - Duet
I know this is not the correct forum but my machine is a corexy. I have been printing for a few years with PLA and decided I should try PETG. -- disaster -- What settings do I need to alter for PETG? I have raised the temp by 5 degrees and turned off cooling. The filament will not stick properly to the glass The layers are not bonding enough I am getting stray blobs Can anybody help or directby appjaws1 - CoreXY Machines
Hi, I am converting my D-Bot and need to have a cable chains from the base to the print gantry and from the print head to the side upright so that it fits along side the 40mm extrusion. I have tried various designs before and found them to be loose and/or sticking when used in the side on mode. I notice that quite a few coreXY users have cable chains and was wondering if you could share your desiby appjaws1 - CoreXY Machines
Thank you Dave, I got so frustrated with this problem so I have designed the items from scratch. It would be of great help if the issues that produce an error like this could be highlighted, either on the render or in the code. The same problem occurs when the object that has been created is not manifold, it would help if the problem area could be indicated so that in a very complicated part thby appjaws1 - OpenSCAD
I have added the file "y-axis-end-plate.DXF" to the item at Very sorry that I missed it off. enjoy.by appjaws1 - Ormerod
Hi all, I have tried everything I and my poor skill level, can think of. I keep getting the following error ERROR: CGAL error in CGALUtils::applyBinaryOperator union: CGAL ERROR: assertion violation! Expr: target(s1).vertex()==target(s2).vertex() File: /opt/mxe/usr/x86_64-w64-mingw32.static/include/CGAL/Nef_3/SNC_FM_decorator.h Line: 218 This works if (leftfront) { import("D:/Core XY/apby appjaws1 - OpenSCAD
The improved version of a Y Twist Fix is at this link Hope that helpsby appjaws1 - Ormerod
It seems a long time since openscad was last released. Is it still active? How do we ask for improvements? I use openscad all the time and at my age would not want to have to learn a different way of designing parts.by appjaws1 - OpenSCAD
Hi, I am posting a picture on Thingiverse showing the modification to my ormerod 1. sorry it's a bit dark, will try and post a better photo in the futureby appjaws1 - Ormerod