Hi, about 3 days ago I had investigate about it. Slicr3r is capable work only with max layer high equal nozzle diameter (see attach.) In this case filaments with circle profile only lies. Block have interspaces and maybe - break up Lubosby Mr.Lupastr - Ormerod
Hi Ray, very nice pictures. I agree with you - isn't visible any difference quality between pictures. A bit mathematics: Nozle diameter D=0.5mm -> radius r=0.25mm -> surface S=PI*r2 = 0.1963 mm2. But I wont build with square profil, not with circular profil. edge will be SQRT from 0.1963 and it is 0.44mm That is only mathematics, reality is different. Is necessary layers more push to put toby Mr.Lupastr - Ormerod
Hi, I am "greenhorn" and with interesting following this forum. By suggest rayhicks I have done little test with printing . Results are in attachment. Left print have Layer height = 0.24mm and right 0.5mm (more then twice ). Thickness 0.24 or 0.25 probably will not be great difference Lubosby Mr.Lupastr - Ormerod
Hi, Thanks for your reflections, comments and suggestions. My problem with code G28 "Home all" was solved. Line four homeall.g file: G1 X-240 F2000 S1 has been rewriten to G1 X-240 F200 S1. Initial speed for carriage return was decreased and all is OK. Maybe SW is slow (or HW fast :-) ) Once more thanks, Lubosby Mr.Lupastr - Ormerod
My report is for those, which experimenting with different bed colours. As well as, when anybody will build ORMEROD from black filament is necessary to sign (mark) home point X-axis - for example white. My problem was after finishing ORMEROD. After G28 X0 code carriage pushed at the end X-axis. My opinium was - IR sensor is wrong. That is why I measured IR sensor.by Mr.Lupastr - Ormerod
Black colour strong absorbing IR radiation, thereby IR sensor may have very small sensitivity. Spacing between IR probe and Lego has been cca 3mm. Here are results: colour: G31 code: Gray 203 Yellow 560 Black 33 Blue 440 Red 432 White 692 Green 370by Mr.Lupastr - Ormerod
Hi, only idea: your Sliccer screen -> Info -> Facets: 3616 (2 shells). Try to split Shells. Shan't it tested.by Mr.Lupastr - Ormerod
Hi, only notice:IR sensors are usually encapsulated with IR optic filter - see eny catalog ;-)by Mr.Lupastr - Ormerod
Hi, 3 days ago I had the same problem. I solved it by changing SD card.by Mr.Lupastr - Ormerod