Yes, when one will do everything myself, so maybe it will work ..by jaro_p - Ormerod
That's a terrible thing, is an absolute crap, there is always something that does not work. Very expensive and stressful experience for € 700!by jaro_p - Ormerod
Hey, thanks for the tip to run programs from the SD - card. This considerably improved prints. Similarly, the reverse flow of 4mm Slic3r helped. What I still can not resolve the position of the zeros in the Z - axis. Deal with it while stopping the program at the beginning of the first layer, the zero adjustment in the middle of the heat bed, then G92 Z0. Finally starting the program again.by jaro_p - Ormerod
Addition to the first point. Too far away means that the system arbitrarily shift starting point in the Z-axis of about 1mm above.by jaro_p - Ormerod
Please serious answer. The printer was not a gift, cost me € 700. I need a prints, not a lifetime to climb over the forums. Have a month to try everything possible and impossible. Naturally filament feed I calibrate accurately.by jaro_p - Ormerod
I've got some problems and hope that you can help me. No matter how often I do the unevenness compensation, the tool nozzle is still too far away from the heatbed during a job. Also it would be better if there was another (fifth) point in the middle to compensate a concave or convex heatbed. Another problem is that the nozzle is pushing the material to early so when he is printing a line theby jaro_p - Ormerod
Exactly the same problem! And one extra: Filament is moved forward and backward but will not print. The extruder is mechanically fine.by jaro_p - Ormerod