Has your blog been removed? i had it booked marked but goes to the firmware configurator setupby steve0-uk - Ormerod
QuoteRoSt thanks alot mate, never had problems with github before. no problem :0) Github can be a painby steve0-uk - Ormerod
QuoteRoSt Yeah, i am trying to get it from github. My webbrowser (chrome) just shows a lot of text and cant get it to start download the files. i have attached the latest version here, replace the folder with yours and you should be good to goby steve0-uk - Ormerod
Do you have the www folder on your SD card?by steve0-uk - Ormerod
Hi David would these boards work with a E3D Chimera or Cyclops hot end??by steve0-uk - Ormerod
I use this on my ormerod 2 There is a guide for it on the T3DP3D siteby steve0-uk - Ormerod
it probably would if used with the Ormerod 2 bearing holdersby steve0-uk - Ormerod
These were files from the ormerod githubby steve0-uk - Ormerod
the attached say stainless steel hope these helpby steve0-uk - Ormerod
Quote0x0000 Looks like @steve0uk made one recently! its a work in progress... It uses DC42's mini sensor board, but I am not sure of how far it steps over the bed... you may have to home x and z with the bed out by however how much is needed for the sensor to be over the corner of the bedby steve0-uk - Ormerod
QuoteTreito What about contacting RS and claiming? Good luck with that one... I used to work at RS and head office are just awful at doing returns of discontinued stock. All those hardware parts are easily found via ebayby steve0-uk - Ormerod
Would be a great feature for when filament breaks and stops extruding. Another thing I've seen is a nozzle clean feature. Seen on the Lulzbot Taz miniby steve0-uk - Ormerod
Hi Jean-Marc are you getting any more of the 5mm tapered nut in? i am going to be doing an order very soonby steve0-uk - For Sale
all paid up Dave gave you a little something extra for reserving one for me Quotesteve0-uk will do, it will be a uk address, had 2 from you already ;0) QuoteDavek0974 Quotesteve0-uk excellent, do I just pay you via paypal on Monday then message you when done or, through your site? QuoteDavek0974 Hi of course, they are due to be ready for posting on Tuesday next week. Dave They are currby steve0-uk - Ormerod
will do, it will be a uk address, had 2 from you already ;0) QuoteDavek0974 Quotesteve0-uk excellent, do I just pay you via paypal on Monday then message you when done or, through your site? QuoteDavek0974 Hi of course, they are due to be ready for posting on Tuesday next week. Dave They are currently turned off on the site so direct Paypal please, presuming it's a UK address, the total isby steve0-uk - Ormerod
excellent, do I just pay you via paypal on Monday then message you when done or, through your site? QuoteDavek0974 Hi of course, they are due to be ready for posting on Tuesday next week. Daveby steve0-uk - Ormerod
Dave just checking you still have one reserved for me, as discussed QuoteDavek0974 Quotesteve0-uk QuoteDavek0974 HI again As we have now started the next batch of X-arm kits, could I please ask all those that expressed an interest to head on over to my shop X-ARM KITS HERE and place their order as they are fist-come-first-served and batch is limited qty. I would expect dispatch to be withby steve0-uk - Ormerod
Quoteorictosh Just taken a look on e-maker and my site E-maker has the 5mm diameter ones More like the one in the kit Where as I have the 6mm ones with the long cable i keep forgetting you have a store, i have it book marked as wellby steve0-uk - Ormerod
You can get them on emaker website as wellby steve0-uk - Ormerod
Thanks for the feedback I'll have a play around and update the fileby steve0-uk - Ormerod
I like things simple. Lol Will send over tomorrowby steve0-uk - Ormerod
I had that... then one day it wouldnt open... just started to load then closed so uninstalled it...by steve0-uk - Ormerod
If you have auto desk 123d I can send you it in that file format. I can't get on with scad I will upload it on Sunday for you, away for weekendby steve0-uk - Ormerod
QuoteFpex My 0.8.5 is properly wired now and config.g ok. Thanks guys. I hate flying wires, but this is a temporary thing to see if my duet0.6 is broken Anybody has designed a case for the 0.8.5 (with and without 4x board)? QuoteDarathy i'm still trying to design one, but atm making not much progress ,i think someone posted nearly finished version in an erlier post on this topic that was me.by steve0-uk - Ormerod
QuoteNeilFrazerLX I've printed this and am in the process of wiring up the hot end board. Position looks good. Can't comment on Backwash but as it's based on the original RepRapPro fan spacer it can't be any worse than the standard. nice one, let me know how your prints turn out its primary use is to mount DC's Sensor Board for those with the newer design which it does, but if it can improveby steve0-uk - Ormerod
QuoteDavek0974 Quotesteve0-uk QuoteDavek0974 HI again As we have now started the next batch of X-arm kits, could I please ask all those that expressed an interest to head on over to my shop X-ARM KITS HERE and place their order as they are fist-come-first-served and batch is limited qty. I would expect dispatch to be within two weeks. Many thanks Dave Dave can I be really cheeky, could yoby steve0-uk - Ormerod
thanks for the links guys, but I need to know if mine (the one I linked to) is correct in terms of where the sensor mounts are and if any backwash occurs from the hot end fan through the heatsinkby steve0-uk - Ormerod
hey all I created this and uploaded to thingiverse my printer is out of action at the moment so I am unable to print and test myself, I just need to know if everything is ok then I can remove the work in progress from it any info on how it performs, if it needs any walls fitting to block air from the cooling fan etc... please let me knowby steve0-uk - Ormerod
QuoteDavek0974 HI again As we have now started the next batch of X-arm kits, could I please ask all those that expressed an interest to head on over to my shop X-ARM KITS HERE and place their order as they are fist-come-first-served and batch is limited qty. I would expect dispatch to be within two weeks. Many thanks Dave Dave can I be really cheeky, could you reserve mine for me please?by steve0-uk - Ormerod