Hi! a solution i made with my ormerod is to enclose it with some box to create a green house. This way you don't need to increase the hot end and/or bed temperatures. ABS cracking is due to poor adhesion between layer hence the previews layer was cool to quickly.by xozip_neutron - Ormerod
Quotedc42 You are probably doing a G28 in your start gcode, so X and Y get homed and then Z. If you were to home X and/or Y but not Z, then there would be a small height error at the end. I see, Thank you for that info DC42. So does it mean that when ever i did 5 point leveling and do homing x/y, i also need to home z? What would happen if i did not home z( assuming i did not use G28)?by xozip_neutron - Ormerod
DC42, What do think is the problem with this? i always receive this error message when ever i start printing. 06:29:42 Error: Triangle interpolation: point outside all triangles! 06:29:32 Error: Triangle interpolation: point outside all triangles! 06:29:31 File sent to print 06:29:17 Bed equation fits points [25.0, 10.0, 1.701] [25.0, 190.0, 1.694] [200.0, 190.0, 1.009] [200.0, 10.0, 0.947] [10by xozip_neutron - Ormerod
My single-nozzle board arrived last week but i was not able to put it on my printer, im to busy this past few days. Last night i had the time to work on it and the upgrade went well (thanx to the clear guide DC42) except for the config.g and homingall.g modifications. But i manage to get it working . I already tested it and i was amazed how it improves the auto bed compensation of ormerod2. Thanxby xozip_neutron - Ormerod
Quotedc42 Quotexozip_neutron Hello DC42, Do you still a stock of this upgrade board? Im very interested with it. i have a lot of problems with leveling my bed. I cannot optimize the full working area of my printer. I am out of stock at the moment, however I have a waiting list and I will manufacture some more when I have a few more orders. Would you like me to add you to the list? Yes sir Pleasby xozip_neutron - Ormerod
Hello DC42, Do you still a stock of this upgrade board? Im very interested with it. i have a lot of problems with leveling my bed. I cannot optimize the full working area of my printer.by xozip_neutron - Ormerod
Thank you for your replys, i alrady removed the fan duct and i temporarily enclosed the the print bed with card board. I have a good results now. thank you.by xozip_neutron - Ormerod
Hi to every one. i have ormerod 2 and i usually printing with ABS. My problem is when i print large objects the print output cracks in some portion. First i thought my hot end temp was just to low so i increased it to 250Deg and bed at 120deg. But the same results see attached pics. By the way it was sliced by cura.by xozip_neutron - Ormerod
Thank you dc42 and jamesf. I will try it when im home. I will up date you.by xozip_neutron - Ormerod
I have the same issue with my ormerod 2.2. When printer is connected to my pc (via usb) prints very well, but when i disconnect the printer from the pc, at some point my printer stops. Same with the rest bed and hot end are still on. By the way i am printing through sd card? Any solution? In addition, when the printer stops and i reconnect it to my pc via usb it continue printing.by xozip_neutron - Ormerod