Hallo I have some trouble setting up the ABL for my Printer. After the G29 the Nozzle is 0.4 mm above the Bed ! I calculated the Z-Probe_Offset as follow ... Run G28 Run G92 Z10 Decrease Z ( 0.1 Steps ) till the Nozzle is 0.1 mm above the Bed. Calculated Z_Probe_Offset = 1.1 mm So i edited the firmware .... z_probe_offset_from extruder -1.1 When i try to start a print the nozzle is 0.4 mm aby Sompy - Firmware - Marlin
Ja hab ich , war einer meiner ersten Gedanken :-)by Sompy - Software
Hallo Die Änderung von 1.1 auf 1.07 ist ja nicht wirklich viel ! Ich werde es mal ausprobieren das Offset anzupassen. Ich möchte aber echt gerne wissen woher den die 0.4 mm kommen bzw warum er nicht auf Z 0 fährt sondern auf Z 0.4 Ich kann mir das nur so erklären das er versucht ein unebenes Bett auszugleichen , ohne die Möglichkeit das Z-Offset anzupassen wäre das ABL ja nicht in der Lage Unebeby Sompy - Software
So habe alles installiert ! Ich habe zwar den selben Fehler allerdings bekomme ich jetzt genau die 0.4 angezeigt 17:51:46.343 : Bed Level Correction Matrix: 17:51:46.359 : +1.000000 +0.000000 +0.000125 17:51:46.359 : +0.000000 +1.000000 -0.000531 17:51:46.359 : -0.000125 +0.000531 +1.000000 17:51:46.359 : X:155.00 Y:59.99 Z:11.09 E:-24.74 Count A:34400 B:15200 Z:8880 17:51:46.375 : X:155.00 Y:by Sompy - Software
Hallo Das ist die Version Marlin-1.0.2-1. Das mit den BugFix Version habe ich nicht so ganz verstanden. Im engl. Forum steht das man rc_final_z_correction ausprobieren soll kann das aber nirgendwo finden. Soll ich mal diese Version ausprobieren Marlin 1.1.0-RCBugFix Denke mal das wir ganz normal wie die Stable Version installiert oder ?by Sompy - Software
Hallo Also ich habe jetzt Marlin neu aufgespielt. Leider immer noch das gleiche Problem. 15:45:04.203 : Bed x: 10.00 y: 40.00 z: 1.23 15:45:13.968 : Bed x: 130.00 y: 40.00 z: 1.22 15:45:23.781 : Bed x: 130.00 y: 160.00 z: 1.18 15:45:33.531 : Bed x: 10.00 y: 160.00 z: 1.21 15:45:33.546 : Eqn coefficients: a: -0.00 b: -0.00 d: 1.25 15:45:33.546 : planeNormal x: 0.00 y: 0.00 z: 1.00 15:45:33.562by Sompy - Software
Wo finde ich die neueste Version ? Die Stable Version ?by Sompy - Software
Hallo Drache Hm ich verwende auch Marlin ! Ich benutze Repetier-Host um den Drucker zu steuern aber auf dem Ramps läuft Marlin FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL: PROTOCOL_VERSION:1.0 Sollte ich mal die neues Version ausprobieren ? Das mit der Matrix wundert mich auch.by Sompy - Software
Hallo Ich denke ich habe verstanden was du meinst !. Was ich nicht verstehe warum das so ist. Wenn ich das Offset auf - 3.0 mm hochsetze verändert sich ja auch immer die Werte des G29. 09:05:25.890 : Bed x: 10.00 y: 40.00 z: 3.14 09:05:35.812 : Bed x: 130.00 y: 40.00 z: 3.10 09:05:45.734 : Bed x: 130.00 y: 160.00 z: 3.02 09:05:55.625 : Bed x: 10.00 y: 160.00 z: 3.07 09:05:55.625 : Eqn coefficby Sompy - Software
Hallo Erstmal Danke für eure Hilfe. Ich zweifel langsam echt an mir selbst. Ich versteh einfach nicht was ich falsch mache. Ich habe alles nochmal geprüft , den Sensor neu ausgerichtet und das Bett nochmal besser ausgerichtet Hier das Ergebnis von G29 19:24:59.499 : Bed x: 10.00 y: 40.00 z: 2.85 19:25:09.419 : Bed x: 130.00 y: 40.00 z: 2.81 19:25:19.339 : Bed x: 130.00 y: 160.00 z: 2.71 19:2by Sompy - Software
Hallo kleiner Drache Mit warmen Bett ( 60 Grad ). Die Z Achse scheint kein Problem zu haben da ich ja immer den gleichen Wert bekommen mit G28 Auch die Werte bei G29 unterscheiden sich nicht wirklich. Kann es sein dass die Software das Bett falsch berechnet ?by Sompy - Software
Hallo Ich habe ein kleines Problem mit den Einstellungen für das s.g Auto Bed Leveling. Mein Drucker ist ein Eigenbau CoreXy. Das Problem ist das wenn ich das " z_probe_offset_from extruder " berechne gehe ich wie folgt vor. G28 G92 Z10 in 0.1 Schritten den Abstand verringern bis Düse 0.1 mm Abstand hat. Das Ergebnis ist immer ein Offset von 1.3 ( 10 - 8.3 ) Ich trage also folgendes in der Aby Sompy - Software
Hallo Mich wundert das man fast nur TR8x8 findet ( direkt in den Motor integriert ) wenn doch wie o.g zum Beispiel eine TR8x4 besser wäre ? Weis einer zufällig was für eine Spindel bzw Motor mit Spindel der Pruska MK2 verwendet ? Sind das nicht auch TR8x8 ? Lg Vincentby Sompy - Mechanik
Hallo Danke für die super schnelle Antwort. Das ganze Thema kann am Anfang ein wenig verwirrend sein. Ich werde es gleich mal ausprobieren mit dem Wert 400. Danke Lg Vincentby Sompy - Elektrik & Elektronik
Hallo Ich habe die alte Gewindestange ( Z-Achse ) an meinem 3D-Drucker gegen einen Motor mit Lead Screw ersetzt. Nun habe ich das Problem das ich die " Steps per mm " in der Software auch anpassen muss. Ich habe den Calculater von Prusa gefunden und bin mir nicht sicher welche Angaben für meinen Motor bzw die Lead Screw richtig sind. Hier ein Link zum Motor. SainSmart Nema 17 Ich habe folgendeby Sompy - Elektrik & Elektronik
Hallo What Values do you use for Acceleration and Speed ? Im not looking for the best Speed-Settings im more intrested in the Print-Quality. Here are the Default-Settings for the Smartrapcore Alu. I think the Values are pretty high ? Has anyone of you already startet to search for the best Values focused on printquality ? //// MOVEMENT SETTINGS #define NUM_AXIS 4 // The axis order in all axisby Sompy - Smart_Rap
Hallo I got a answer from Serge ( Smartfriendz ) and he was very polite like always. He made the offer so send me a stronger Powersupply but i allready bought one at a local store. So for me i cant say nothing wrong about the support from Smartfriendz so far ! But i would recommend to update the manual Thank you DjDemonD and PDBeal for your Helpby Sompy - Smart_Rap
Hallo Will a E3D V6 Hotend fix in the Hotend-Mount that is original on the Smartrapcore ALU ? For me the " Bowden Version " of the E3D V6 looks much bigger ! Best Regardsby Sompy - Smart_Rap
Hallo Das Kit beinhaltet ein MK2 b Heatbed ! Habe leider noch keine Antwort von Smartfriendz bekommen. Wenn ich ehrlich bin dann bin ich schon ziemlich sauer ! Was haltet ihr von dem Netzteil was ich gepostet habe ? Habe jetzt 3 Wochen auf fehlende Teile usw warten müssen ich würde jetzt echt ganz gerne mal anfangen zu drucken auch wenn das heißt das ich mir das Netzteil selbst kaufen muss.by Sompy - Elektrik & Elektronik
Hallo Danke dir für die Infos ! Ich bin jetzt doch ein wenig sauer auf die lieben Leute bei Smartfriendz werde die gleich mal anschreiben. So trotzdem brauche ich eine Lösung. Habe mal schnell geschaut was es so gibt. Das hier müsste doch für meine Zwecke ausreichend sein oder ? Netzteilby Sompy - Elektrik & Elektronik
Danke Wurstnase das habe ich mir auch gedacht ! Was ist mit der Möglichkeit 2 Netzteile zu verwenden wie oben beschrieben ?by Sompy - Elektrik & Elektronik
Hallo Ich habe mir ein Printerkit von Smartfriendz gekauft ( Smartrapcore ALU ) Es arbeitet mit einem Ramps 1.4 soweit so gut. Das Problem ist die Spannungsversorgung. Leider liefern sie nur ein 12V / 10 A Netzteil mit. Um die Motoren und das Heatbed zu betreiben sind 10 A denke ich zuwenig ? Jetzt habe ich noch ein altes Netzteil von meinem K8200 hier rumliegen mit 15 V / 6.7 A Kann ich beideby Sompy - Elektrik & Elektronik
I just wondering because they sell the KIT with Heatbed and a Powersupply that cant handel thre Heatbed. Also they do not update the manual what i cant understand its just a hour of time to update the missing parts. Now i dont know what to do but i thinkling about to write Smartefriendz to get a proper Powersupply or a extra one. I ordered a Kit with anything included and this Powersupply will noby Sompy - Smart_Rap
I think the Problem is the Powersupply. QuoteConnecting Power Connect your 12V power supply to the RAMPS shield. Reversing +/- or otherwise incorrectly connecting power can destroy your electronics and cause fire hazard. The bottom pair of connectors marked 5A power the stepper drivers and Extruder heater/fan (D9, D10). The source should be rated a minimum of 5A. The pair of connectors above marby Sompy - Smart_Rap
Hallo Thank you PDBeal I just have checked your Link !. To me it looks like that most of the Configuration its about PID. #define TEMP_SENSOR_BED 11 <<< set this value to match your thermistor using a value from the table at the start of "Thermal Settings" section . . #define BED_MINTEMP 5 . . #define BED_MAXTEMP 150 . . #define PIDTEMPBED #by Sompy - Smart_Rap
Hallo I try to test the Headbed but i will not work. The Temp Sensor shows the right Temp but when i aktivate the heatbed nothing happens. The LED do not light up and i get no 12 V at the Inputs. Do i have to aktivate it in the Firmware ?by Sompy - Smart_Rap
Hallo Thank you for the Tip ! I have changed the Steps to 160 and now it runs perfekt. What im worried about is the shaking and vibrating ! The Frame looks very good and tight but the printer starts to virbrate alot when it moves ! I would love to run a stresstest or a small test programm that moves the printer in x and y ! Anyone knows a GCode Programm for that ?by Sompy - Smart_Rap
Hallo DJDemond Im Sorry for my late reply i was busy alot. Thank you for all the Information ! It was a good point to start. I have downloaded the File from .... The Configuration of the new Homing was quit easy because of your information. But it seems to be that i have overwrite some other configurations because my printer now just run the half way on both axis. When i tell the Printer to ruby Sompy - Smart_Rap
Hallo I just have bought the smartrapcore alu kit. The assembling of the mechanic parts was pretty easy and well documented. Its my first printer and now i have some questions about the calibration. First questions is about the Calibration of the printing bed. In the Documentation of the Kit is one picture that shows the Offset from the Homing-Position to the Start (Left Cornor ) of the Printbeby Sompy - Smart_Rap