Show all posts by user
Avete appena stampato un cubo ed è venuto fuori un prisma? Volete un parere sulla qualità della stampa? Chiedete consiglio qui.Se siete agli inizi non chiedete qui ma nella sezione dedicata ai principianti.
Re: ignition problems - 12 years ago
know that very engaged in the development ......... you have solved the problem of ignition Viki Lcd? many Thanksby maralb - Repetier
Re: ignition problems - 12 years ago
I'm not good at changing the firmware but with version 0.83 was perfectby maralb - Repetier
Re: ignition problems - 12 years ago
change included. the delay and accepted but the display is always offby maralb - Repetier
Re: Update on the E3D All Metal Hotend (Now finally shipping!) 
[Lots of pictures] - 12 years ago
Pla printing with E3D I finally managed to print without many hitchesby maralb - General
Re: Repetier Gcode M300 - 12 years ago
many thanks now it works, there a way to uncomment these lines? if I put / / on the lines I can not compileby maralb - Repetier
Re: Repetier Gcode M300 - 12 years ago
if I disable Viki Lcd Panacut Device works perfectly the sound of the buzzer. maybe the problem because the LCD is equipped with a buzzer viki also on board and then go to restart the firmware. also tried with version 0.83by maralb - Repetier
Repetier Gcode M300 - 12 years ago
I want to ring my buzzer. with the command M300 I get a reboot What am I wrong?? test repetier 0.90alphaby maralb - Repetier
Re: Script Z-probe - 12 years ago
fantastic ... I hope in your great work with the correction of delta Z probe 'm in love with repretierby maralb - Repetier
Re: Script Z-probe - 12 years ago
I'm sorry to write, but I use google translator to read / write. I do not understand the English translation Italian?. on Delta system, I can use the probe connected to the Z Min?? while all the towers are on Max Limit. do not understand the translation of this writing: First, you should have your z endstop end z-max if you do z-probing. You can have also a z-min endstop, but you need to set itby maralb - Repetier
ignition problems - 12 years ago
I'm trying the new version 0.90alpha repetier use Azteeg X3 Wiki Lcd I have a problem during power the display is blank, I have to do a reset to the startupby maralb - Repetier
Re: Update on the E3D All Metal Hotend (Now finally shipping!) [Lots of pictures] - 12 years ago
I can not wait to write SanjayM in discussions. Today I finally received my replacement part sent Free of charge. I want to thank in public SanjayM MANY THANKSby maralb - General
Re: Script Z-probe - 12 years ago
excuse the many questions I get this when I send G29 Log 15:38:25.656 : N145 G29 *50 15:38:25.656 : Info:Autoleveling disabled 15:38:27.750 : Z-probe:11.09 X:-48.00 Y:-72.00 15:38:30.234 : N146 M105 *4 15:38:31.390 : Z-probe:10.27 X:100.00 Y:-60.00 15:38:35.265 : N147 M105 *5 15:38:35.656 : Z-probe:10.21 X:-3.00 Y:90.00 15:38:35.890 : Z-probe average height:10.53 15:38:35.906 : Info:Autolevelingby maralb - Repetier
Re: Script Z-probe - 12 years ago
I can not do start the script I digits G32 and no commands work scripted these are the commands to enable swicth with a slap on the X axis # define Z_PROBE_START_SCRIPT "G1 x-113 y-36 z20 F5000 \ nG1 x-92 y-67 F5000" end this script instead: # define Z_PROBE_FINISHED_SCRIPT "G1 x7 Y-108 F5000\nG1 z0 F5000" many thanks for your replyby maralb - Repetier
Script Z-probe - 12 years ago
are being tested on repetier 0.90 with Zprobe. how can I use the command script to do from my Delta to trigger the level of the axes? I see in the compilation config.h exist a command Start and End sript /** These scripts are run before resp. after the z-probe is done. Add here code to activate/deactivate probe if needed. */ #define Z_PROBE_START_SCRIPT "" #define Z_PROBE_FINISHED_SCRIPT "" hoby maralb - Repetier
Re: Update on the E3D All Metal Hotend (Now finally shipping!) [Lots of pictures] - 12 years ago
SanjayM Wrote: ------------------------------------------------------- > maralb > Your order was for one of the earlier versions - > and that particular batch had a shorter heat-break > than other versions. Which in hindsight was a > mistake. I have emailed you about getting you a > replacement part. > I still wait for the way to replace the old heat-break. are not at all hby maralb - General
Re: Update on the E3D All Metal Hotend (Now finally shipping!) [Lots of pictures] - 12 years ago
hello SaniayM, have also stretched the Heat Break? I received a replacement that seems to be a different lengthby maralb - General
problem Repetier 0.83 firmware - 12 years ago
I do not understand why I miss the steps when I go to the location of the first layer First Layer Heigth 0.16 I get a position 0.15 it seems as if some steps are not memorized: 0.07 0.14 0.16 type as well as odd numbers What's wrong in my configuration? use repetier 0.83 with Host V0.90C With the Delta system Rostock 11:44:13.515: N3504 G28 * 1 11:44:13.531: Z0.16 N3505 G0 X0 Y0 F400by maralb - Repetier
Re: Update on the E3D All Metal Hotend (Now finally shipping!) [Lots of pictures] - 12 years ago
greetings to all I write from Italy I'm new in this community I wanted to show my version V4 'received after about 30 days of waiting why be 10 layers instead of 8 that I see in the pictures on the forum seem to be too thin layers SanjayM essere un nuovo modello?by maralb - General