//#define MENU_ADDAUTOSTART //#define SD_SETTINGS // Uncomment to enable #define SD_CFG_SECONDS 300 // seconds between update #define CFG_SD_FILE "INFO.CFG" // name of the configuration file #define LCD_LANGUAGE cn #define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware //#define DISPLAY_CHARSET_HD44780_WESTERN //#define DISPLby yg12344 - GCODE, Software e Firmware
IL problema è già stato risolto il problema MK4.2.86 scaricare, ma non ha smesso di Correre G30A figurano I seguenti codici per Molto Tempo non si Ferma busy:processing Echo:r:100.4000 (adj:0.000000) c:-1.4300 busy:processing Echo:r:100.4000 (adj:0.000000) c:-1.4300 Echo:r:100.4000 (adj:0.000000) c:-1.4300 busy:processing Echo:r:100.4000 (adj:0.000000) c:-1.4300 busy:processing Echo:r:100.4000 (by yg12344 - GCODE, Software e Firmware
Delta use G30A can not complete the code that is a problem for a long time will not stop Echo:r:100.4000 (adj:0.000000) c:-1.4150 busy:processing Echo:r:100.4000 (adj:0.000000) c:-1.4200 Echo:r:100.4000 (adj:0.000000) c:-1.4150 busy:processing Echo:r:100.4000 (adj:0.000000) c:-1.4150 busy:processing Echo:r:100.4000 (adj:0.000000) c:-1.4200 busy:processing Echo:r:100.4000 (adj:0.000000) c:-1.4150by yg12344 - GCODE, Software e Firmware
MK4.2.85 open LCD error editor sketch\module\lcd\ultralcd.cpp.o: In function `lcd_control_motion_menu': sketch\module\lcd/ultralcd.cpp:1942: undefined reference to `zprobe_zoffset' sketch\module\lcd/ultralcd.cpp:1942: undefined reference to `zprobe_zoffset' sketch\module\lcd\ultralcd.cpp.o: In function `_menu_action_setting_edit_float32': sketch\module\lcd/ultralcd.cpp:2403: undefined refereby yg12344 - GCODE, Software e Firmware
Tried it repetier-firmware, surprise, the efficiency is very high, not entirely perfect optimization can also support 12864, looked at the code and found repetier completely rewritten u8g support libraries for 12864, efficiency Leverage drops, it is recommended that you use repetier speed much faster than the marlinby yg12344 - Progetti e nuove idee
Ciao MarlinKimbra marlinkimbra_v0_5_9.HMI vi fornirà un problema 1, non è possibile impostare la temperatura 2, non può controllare il x, y, z di movimento e la casa 3, la temperatura tup pulsante non risponde, pulsanti tdown sono +by yg12344 - GCODE, Software e Firmware
Why I can not set the temperature and control Nextion x, y, z, axis, and go home. 1、temp heating nozzle temperature can not be set here, info is always zero degrees here 2、move here can not control the movement of any axis, the point does not respond to any button on the control shaft Help! Help!Help! Help!Help! Help!Help! Help!by yg12344 - GCODE, Software e Firmware
NEXTION HMI LCD can not set the temperature, SD card can not be read black and whiteby yg12344 - GCODE, Software e Firmware
This is my printed works, and tomorrow I will print a metalby yg12344 - GCODE, Software e Firmware
MagoKimbra really appreciate your help now normal, and can not control the temperature in the NEXTION HMI LCD, What is the problem?by yg12344 - GCODE, Software e Firmware
NEXTION HMI LCD,Temperature can not be setby yg12344 - GCODE, Software e Firmware
MagoKimbra Thank you for your helpby yg12344 - GCODE, Software e Firmware
this is mineby yg12344 - GCODE, Software e Firmware
magokimbra I've done as you say the problem >>>m119 SENDING:M119 echo: Reporting endstop status x_min: TRIGGERED x_max: NOT TRIGGERED y_max: TRIGGERED z_max: NOT TRIGGERED z_probe: TRIGGERED Pronterface lcd connection must only be used, if not connected to the same stuck pronterface Unable heated nozzleby yg12344 - GCODE, Software e Firmware
The same problemWhat am I doing wrong?by yg12344 - GCODE, Software e Firmware
QuoteMagoKimbra Ok z probe defined in marlinkimbra.it For Nextion on ramps the problem is this... TX1 and RX1 are used for Zmin and Zmax pin.. Now use Xmax pin Xmin pin for Zmax pin Ymax pin Ymin pin for probe pin Now Zmin and zmax pin free for nextion... The same problemby yg12344 - GCODE, Software e Firmware
Marlinkimbra.it firmware configuration tools, configuration 4.2 × firmware has not changed Marlinkimbra.it Configuration I get the configuration does not change Marlinkimbra.itby yg12344 - GCODE, Software e Firmware
NEXTION HMI LCD so take it?by yg12344 - GCODE, Software e Firmware
LCD how to connect ramps 1.4 to ask you to help draw outby yg12344 - GCODE, Software e Firmware
Marlinkimbra firmware configuration tool (2 edition) is unable to configure the 4.2 x firmware version. Only Xmax, Ymax, Zmax, Z probe can not be definedby yg12344 - GCODE, Software e Firmware
MarlinKimbra please help me 4.2.0 Delta, many of my problems Delta=arduino 2560+ramps 1.4+NEXTION HMI LCD 1、NEXTION HMI LCD in the boot does not move 2、Marlinkimbra.it/ cannot be configured 4.2 3、Unable to configure 6 mechanical switches, no Z probeby yg12344 - GCODE, Software e Firmware
MagoKimbra Whether you can join a laser scannerby yg12344 - GCODE, Software e Firmware
@MagoKimbra Thanks for sharingby yg12344 - GCODE, Software e Firmware
@MagoKimbra can you please also share the HMI file?by yg12344 - GCODE, Software e Firmware
@MagoKimbra can you please also share the HMI file?by yg12344 - GCODE, Software e Firmware