Hi Guys, I managed to get all the errors out on compiling. I got the printer working on 1 extruder. Now I want to add the function for the second extruder and the IDEX configuration. But I get confused with the positions. I made a sketch of how the printer is build: How do I translate that to these settings in Configuration_adv.h: /** * Dual X Carriage * * This setup has two X carriages tby KoenP - Firmware - Marlin
Hi Folks! Does someone have an example configuration.h and configuration_adv.h for an IDEX configuration? I have never configured a Marlin before and I keep on getting errors on compiling. Something with the axes....... Thanx!by KoenP - Firmware - Marlin
Sounds pretty weird since the USB cable just provides 5V to the arduino/RAMPS, and hotend/heated bed/motors should get powered from an external 12/24V power supply Do you have other "exotic" 5V electronics connected to your board, such as lights, 5V fans??? Maybe you fried a stepper driver in the previous setup?? Just connect the RAMPS with the arduino, remove/disconnect everyting else like steby KoenP - Prusa i3 and variants
for prusa P3 steel owners or people thinking of buying one : This blog inspired me of rebuilding my P3 to his MK2 configuration, My print quality improved significant, and noise reduced to almost nothing. worth to read it, and all parts are on thingiverse! My printing experience went from frustration to happiness just my 2 centsby KoenP - Prusa i3 and variants
I had a similar problem with a MK8 extruder, I even bought a full metal one and kept having the problem. I was using A4988 drivers and replaced the extruder one with a DRV8825, which can handle more current. That solved the step skipping for me, but still had filament that curled up in the extruder. I drilled out the push fitting so that the teflon tube can enter the extruder, and then cut the tby KoenP - Prusa i3 and variants
Hoi Iedereen! Ik ben Koen, Ik kom uit regio Antwerpen in Belgiƫ. Een kameraad van mij had al een tijdje een Velleman K8200 3D printer, zo heb ik de microbe te pakken gekregen.... Dus heb ik nu mijn eigen printer gebouwd, naar het ontwerp van de Prusa P3 Steel. De geprinte onderdelen zijn op de K8200 gemaakt en zijn naar het ontwerp van de "Toolson Edition" en zijn een combinatie van de MK1 &by KoenP - Projecten