Show all posts by user

z-as wilt niet volledig zakken - 10 years ago

goedenavond, ik heb een probleem met mijn mendel90 sturdy, als ik de z-as volledig wil laten zakken via pronterface stop de as op 10 cm van de eindstop. Dit gebeurt ook als ik een print wil starten. Weet er iemand hoe ik dit kan oplossen? alvast bedankt

by 3Design - Dutch User Group - Archive

cable track - 10 years ago

hallo, ik ben opzoek naar een cable track voor de draden van mijn extruder, ik heb gezien dat reprapworld er een heeft maar deze is te smal. weet er iemand waar ik en cbale track kan kopen?

by 3Design - Dutch User Group - Archive

Worldwide reprap parts - 10 years ago

Hi I can offer you some parts to build a reprap - i can print the parts for al the reprap like the mendel90 and the prusa i3 - i can print al the printed parts for an extruder - i can make hobbed bolts - i can sell you glass sheets and bulldog clips - i cna sell you smooth and treathed rod So, i'f someone is intrested you may always contact me by pm

by 3Design - Plastic RepRap Parts for Sale

3D printing service in Belgium - 10 years ago

hello, if you want to print something you always may contact me. I can print everything what you want in PLA or ABS.

by 3Design - Job Shop: I make stuff!

(worldwide) printed parts - 10 years ago

goodevening, if someone is looking for some printed parts, i can print them, at this moment i can print in black and white PLA but i ve ordered some colours. so, if you are intrested, let me know something. PS i'm located in belgium

by 3Design - Plastic RepRap Parts for Sale

Re: Filament - 10 years ago

Zijner nog winkels die dat verkopen?

by 3Design - Dutch User Group - Archive

Re: Filament - 10 years ago

Ik ben ook opzoek naar een fte slang om mijn filament door te voeren naar de extruder. Ik hoop hiermee het probleem dat mijn filament breekt op te lossen. Weet er iemand waar ikzo'n slang kan kopen?

by 3Design - Dutch User Group - Archive

Filament - 10 years ago

Hallo, Nu ik druk bezig ben met het 3d printen zou ik nog een paar rollen filament willen bijkopen, ik heb momenteel de pla van uw3dprinter.nl en hier ben ik zeer tevreden van. Nu is mijn vraag welk pla filament vinden jullie ook goed maar is iets goedkoper dan dat van uw3dprinter.nl Heeft er iemand al iets geprint met het filament van reprapworld?

by 3Design - Dutch User Group - Archive

Problem with extrudermotor - 10 years ago

hello, My printer is ready to make is first print but ther is al little problem, when i start a print, the extruder motorturns reverse. But when i give the command in pronterface, he turns in the right direction. Does someone know how. I can solve this? Regards

by 3Design - Mendel90

Re: Z axis calibration - 10 years ago

i ve tried to load the firware on my melzi several times but it isn't possible because i can't select the melzi board in arduino, does anyone know how i can solve this problem. can i solve this by refitting the jumpers?

by 3Design - Mendel90

Re: Calibratie mendel90 sturdy - 10 years ago

Het probleem zit in de z as, ik moet de software aanpassen voor de m10 spindel, dit lukt wel maar ik kan de software niet laden op mijn melzi en een tweede probleem is dat de printkop niet stopt boven de glasplaat.

by 3Design - Dutch User Group - Archive

Re: Calibratie mendel90 sturdy - 10 years ago

Is er niemand die mij kan helpen, ik heb deze printer nodig voor de presentatie van mijn eindwerk!!

by 3Design - Dutch User Group - Archive

Calibratie mendel90 sturdy - 10 years ago

Ik heb zelf een mendel90 sturdy gebouwd en de bouw ging erg vlot maar de calibratie van de printer lukt me niet. Is er iemand in Belgie of in nederland die me hiermee wilt helpen? Alvast bedankt

by 3Design - Dutch User Group - Archive

Re: Illuminate printing area - 10 years ago

i' m also using the panelolu2, can i attach the cables of the led strips on the red connector plate of the P2 or can i attach then to the fan input on the melzi?

by 3Design - Mendel90

Re: Illuminate printing area - 10 years ago

I am also looking to attach some lights on my mendel90, i am going to use this lights, they are very bright But i dont know how i need to power them

by 3Design - Mendel90

lights on mendel90 - 10 years ago

i want to attach some lights on the frame of my mendel90, i was thinking this lights but how can i power them by using to melzi or do i need to use a battery?

by 3Design - Mendel90

Re: Z axis calibration - 10 years ago

I ve found the melzi folder, i am going to try it again

by 3Design - Mendel90

Re: Z axis calibration - 10 years ago

My Documents\Arduino\Marlin\Melzi i don't find the melzi in the marlin map.

by 3Design - Mendel90

Re: Z axis calibration - 10 years ago

And what is the melzi folder?

by 3Design - Mendel90

Re: Z axis calibration - 10 years ago

From the "Tools|Board >" menu choose "Melzi W/ ATmega1284p 16mhz" i cant select this board, it is not in the list.

by 3Design - Mendel90

Re: Z axis calibration - 11 years ago

is there someone in Belgium that wants me to help to calibrate my mendel90???

by 3Design - Mendel90

Re: Z axis calibration - 11 years ago

when i try to upload the firmware i get this eror code: error oops! make sure you have sanguino selected from the tools ->boards menu

by 3Design - Mendel90

Re: Z axis calibration - 11 years ago

If i move my z axis 50 mm with pronterface moves it 62,50mm. Do i need to adjust the 200 to 128?

by 3Design - Mendel90

Re: Z axis calibration - 11 years ago

where in the marlin do i need to adjust the steps/mm?

by 3Design - Mendel90

Re: Z axis calibration - 11 years ago

What do you mean with the z height? I don't understand that. I think thaht that is the problem with my mendel90.

by 3Design - Mendel90

Re: Z axis calibration - 11 years ago

I've adjust the value from each motor, is there anything else that i need to adjust?

by 3Design - Mendel90

Re: Z axis calibration - 11 years ago

thank you, i'm going to try that

by 3Design - Mendel90

Re: Z axis calibration - 11 years ago

Is this the file from github? How can i open a github file in arduino?

by 3Design - Mendel90

Re: Z axis calibration - 11 years ago

i' ve found a video but in that video they adjust something in a arduino file and i can't find this file. does anyone know which file this is?

by 3Design - Mendel90

Re: Z axis calibration - 11 years ago

is there a video that i can see how i need to calibrate a mendel90 becase i don't understand how i need to do it.

by 3Design - Mendel90