Show all posts by user
http://reprap.org/wiki/CoreXY
Re: Definitive CoreXY Calibration Guide. - 7 years ago
Hello everyone. I recently built myself a corexy system. For some reason when I move the X axis the Y axis will also move. The Y axis moves fine. It is only when i try to move the X axis that the Y also moves. When I for example tell the X axis to move 100mm it only moves 75mm and the Y axis moves the other 25mm. Any help?by JeandreCoetzer - CoreXY Machines
Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago
hello all I got my Migbot about a month ago and have been printing with PLA which worked fine. I tried abs the other day and have issues with layers not sticking. The layer height is set to 0.2, Heatbed on 110 and extruder on 230. I read that i should have the fan off so for this print it was off the whole time. Small flat parts print fine, but as soon as i try to print something with a littleby JeandreCoetzer - Prusa i3 and variants
Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago
Hello I loaded my sd card that came with my Migbot, with the gcode of a part i want to print. When I insert the sd card in the printer it says "sd card loaded", but when i try to access the sd card it says no sd card on the lcd menu. What could be the problem?by JeandreCoetzer - Prusa i3 and variants
Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago
Hello all I bought a Migbot Prusa I3 and the printhead is about 20mm left of the bed on the X axis and 50mm infront of the printerbed on the Y axis when homed. This causes the centre of the bed to be offset from the true centre. Can anyone give advice?by JeandreCoetzer - Prusa i3 and variants
X/Y Home Offsets - 8 years ago
Hello all I bought a Migbot Prusa I3 and the printhead is about 20mm left of the bed on the X axis and 30 infront of the printerbed on the Y axis when homed. This causes the centre of the bed to be offset from the true centre. Can anyone give advice?by JeandreCoetzer - Prusa i3 and variants