thanks. I just decided to remove the G32 from the slicer start code and run it manually when I start printing. We'll see how that works out.by EricE555 - CoreXY Machines
Is there any way to skip the running of bed.g (called whenever a g32 is issued) if not needed? I have g32 in the start code of my slicer. That is the only way to insure bed leveling has been done prior to any print. But there are times when I issue print after print after print without powering down the Z steppers. In this case, I don't need to rerun the bed leveling and doing so is just wear aby EricE555 - CoreXY Machines
thank you. I'll try that and post back. Very helpfull. 3 prints in and no failures. that seems to have been the problem. Thank you much.by EricE555 - Firmware - Marlin
Attaching configs in case anyone wants to look. any help is appreciated.by EricE555 - Firmware - Marlin
If this were your problem, what you you try to figure out what is going on?by EricE555 - Firmware - Marlin
I compiled a recent version of bugfix 2.0 and it started crashing during prints. So I grabbed the very latest and it is still crashing. Octoprint log below but I don't think it tells me much. What can I do to find out why it is crashing? 2021-01-24 12:10:14,435 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CE3_3DBenchy.gcode, owner: _api, user: _api 2021-0by EricE555 - Firmware - Marlin
I found it. Had to set: #define CR10_STOCKDISPLAYby EricE555 - Firmware - Marlin
Well, it compiles but I get no display on ender 3 stock display. (skr 1.3 board though). Is there something obvious that I failed to set in terms of the display in my configs? Again, thank you to anyone who is willing to help.by EricE555 - Firmware - Marlin
Thankyou much! I was able to compile successfully.by EricE555 - Firmware - Marlin
Compiling using the current bugfix-2.0.x from yesterday. Compiling in VSC and PlatformIO. If I disable BLTouch, it compiles fine. If I enable BLTouch, I get the compile error shown: ... Compiling .pio\build\LPC1768\src\src\feature\babystep.cpp.o Compiling .pio\build\LPC1768\src\src\feature\bedlevel\abl\abl.cpp.o In file included from Marlin\src\module/../HAL/shared/servo.h:76, fby EricE555 - Firmware - Marlin
Again, thank you. I solved my issue. You got me thinking about files and paths and I found that my anti-spyware had quarantined a piece of my platform IO files.by EricE555 - Firmware - Marlin
Thank you. That sounds possible. I'll report back after reinstalling Platform IO.by EricE555 - Firmware - Marlin
I was able to compile only a few days ago with no issues. Today I tried and I got the error: HARDWARE: LPC1768 100MHz, 31.80KB RAM, 464KB Flash DEBUG: Current (cmsis-dap) On-board (cmsis-dap) External (blackmagic, jlink) PACKAGES: framework-arduino-lpc176x 0.1.3, toolchain-gccarmnoneeabi 1.80201.190214 (8.2.1) Converting Marlin.ino 'arm-none-eabi-g++' is not recognized as an internal or externby EricE555 - Firmware - Marlin