Show all posts by user
http://reprap.org/wiki/CoreXY
bed heating error - 4 years ago
getting an error coming up on my creality ender 6 . ive upgraded the board to stm32 board and using rep rap firmware and have a error message "bed heating less than 1.5 degree/sec" coming up when i go to heat the bed. does this mean my beds faulty. temp sensor seems to be reading correctly. bed temp starts at ambient and slowly rises about 5 degrees when the error occurs.by crankyev - CoreXY Machines
Re: Fly RRF e3 Ender6 - 4 years ago
@dust thanks for your reply. sorry for sounding like a complete noob, how/where do i do this? I understand sort of what your saying, that the motors move in different directions when operating x and y axis part. Do i swap the plugs over on the board ( put x plug into y driver socket and visa versa), and then swap the pins around in the plug itself?by crankyev - Firmware - mainstream and related support
Fly RRF e3 Ender6 - 4 years ago
Hello, im new to 3d printing. Know nothing on g codes/firmware. issue i have just fitted a fly rrf e3 board to my ender 6, due to a damaged creality 4.3.7 board. (creality dont sell new ones, only 4.2.7, not suitable for the 6). set up with reprap firmware via their rrf config page. fitted to printer and go to home motors, get Z axis correct, press the Y axis and moves the X axis, press the X axiby crankyev - Firmware - mainstream and related support