sorry. whhen i use the cr10 stockdisplay marlin mode is still just a black screen that says marlin on the top. as for Z it just seems like when you push the Z^ button the bed should go up thats how it was on the stock ender 6 display. I followed what you said though and I think I figured that part out now. edit: thanks for your help i do appreciate itby dragon800 - Firmware - Marlin
if i invert Z then it is backwards in the controls. I dont have a cr10 display i have a TFT35 but ive learned my BTT E3RRF board is only compatible with a few lcd's and no matter which i define the build fails. guess i should have looked around for a better board. all of this is just so damn confusing i just wanna print again.by dragon800 - Firmware - Marlin
Also when i switch to marlin mode on the screen it just says marlin at the top and nothing else. Sorry if these are stupid questions im trying my best to learnby dragon800 - Firmware - Marlin
my machine homes to the back right and its maxed I.E. at home the x and y are at 260. are they supposed to me min at home? I just dont understand why when it goes to home z the bed moves all the way down to the bottom of the machine rather than up to the bl touch.by dragon800 - Firmware - Marlin
thanks for the info. now my bed moves the wrong way when i try to home the printer. it moves correctly when I move it manually so its not wired reverse. I tried setting z home dir to 1 but the firmware fails saying it needs to be set to -1 for bl touch. Im starting to think im just not smart enough for all this.by dragon800 - Firmware - Marlin
i filled out everything in the config and adv config files is there something else i need to doby dragon800 - Firmware - Marlin
I just followed tutorials online to add the settings into Marlin using Platform IO. I'll be honest i dont really know what G29 is or how to use commands. Total newbie at all this Im trying but not very good at it.by dragon800 - Firmware - Marlin
I have been trying to get a bl touch to work with my setup and i am getting two errors on my TFT 3.5 screen invalid mesh and failed to enable bed leveling. I'll link my config files if anyone has time to take a look. I have tried a bunch of different settings going off guides online but nothing seems to work. Thanks any help is appreciated. edit: if needed it's an Ender 6 with a BTT E3 RRF V1.1 mby dragon800 - Firmware - Marlin
yeah that makes perfect sense in hindsight im just not very good with this stuff yet.by dragon800 - CoreXY Machines
YES!! That worked thank you so much man I've been banging my head against the wall with this thing! It's so nice when a total stranger takes the time to help.by dragon800 - CoreXY Machines
ah Ive swapped them but i dont think i tried changing directions with them swapped. Thank you good sir.by dragon800 - CoreXY Machines
I have set up my ender 6 with a BTT E3 RRF V1.1 board and TFT 3.0 screen and I got most everything figured out but the Y axis moves inverted. I tried switching the plugs around i cant flip the plugs backwards like some suggest because they are one way plugs, and I tried every possible combination for motor direction in Marlin software but the closest I can get is the Y axis inverted. It is confusby dragon800 - CoreXY Machines
thanks Dust and for anyone that finds this while searching their problem. That fixed my issue of the endstops not working.by dragon800 - Firmware - Marlin
thanks i really appreciate it! now i just gotta figure out the other issues. i should have just got an ender 3 theres so much more info out there for them. seems not many people do much with the ender 6by dragon800 - Firmware - Marlin
Awesome thanks for your help! Everything is good now except I have a failed to enable bed leveling error and the end stops dont work. so must be i dont have the latest Marlin that's why I couldn't build a successful firmware? Edit: I should be able to download the latest marlin files and just paste my config files in to get started right?by dragon800 - Firmware - Marlin
Thank you!! I'll try it out in a bitby dragon800 - Firmware - Marlin
I am no coder but I've been trying for days now to use platformIO to get Marlin working on my ender 6. I think I'm close but now I have an error coming up when I try to build that says c:\users\indy6\downloads\3d print firmware\try\marlin\src\core\drivers.h:80:51: error: missing binary operator before token "(" 80 | #define AXIS_DRIVER_TYPE(A,T) AXIS_DRIVER_TYPE_##A(T) I would be so gby dragon800 - Firmware - Marlin