Omdat niemand anders antwoord. Ik weet niet zeker of het kan maar ik heb het nog niet gezien. Voor zover ik weet heeft een ramps het al moeilijk genoeg met een normaal grafisch display.by gforce1 - Electronica
you can use a lcd to control the printer. groetjesby gforce1 - Reprappers
We need some more information. Are you printing with PLA or ABS? And at what temperatures? Have you mounted a fan on your heatbreak? Have you calibrated the steps for the extruder? Have you set the filament diameter in your slicer correct?by gforce1 - Prusa i3 and variants
Leuk, eindelijk weer een project hier. Succes met de bouw. Ik blijf het volgen.by gforce1 - Projecten
I don't know the dimensions of the holes, maybe here: 3dlabtek.by gforce1 - Prusa i3 and variants
this will not solve your problem: i asume you have M5 treads on your z-axis? the it is not wise to print with a layerheight of 0,25. see reprap calculatorby gforce1 - Reprappers
Ik heb hier nog iets gevonden jam sensorby gforce1 - Electronica
I think you have set it up as a corexy printer in the configuration.by gforce1 - Reprappers
There is a prevention for cold extrusion in marlin. //this prevents dangerous Extruder moves, i.e. if the temperature is under the limit //can be software-disabled for whatever purposes by #define PREVENT_DANGEROUS_EXTRUDE //if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately. #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MINTEMP 170 #dby gforce1 - RAMPS Electronics
QuoteReplace 100 steps per mm with 1/16 microstepping Ik gebruik repetier, maar die heeft dezelfde parameter en 100 is precies goed (Dat kreeg ik door van de Repetier user.) Ik hen nu ook een prusa i3 met mk8, ik heb hem ook op 100 staan.by gforce1 - Software
Zit er geen vuil in? Kkein stukje metaal of zo.by gforce1 - Extruder, Hotend en Filament
doneby gforce1 - Look what I made!
something like this you mean?by gforce1 - Let's design something! (I've got an idea ...)
Apr. 100 steps per mm with 1/16 microsteppingby gforce1 - Repetier
Quotetenij000 if use nozzle 0.8 does mean also have keep gap of 0.8 between the buildplate and the nozzle for 0.4 nozzle piece of paper what to use for 0.8 or does it not matter ? The nozzle size doesn't matter for leveling the bed and adjusting the z-height, use the piece of paper. Only for layer height as DD mentioned.by gforce1 - Reprappers
check also your speed and accelaration settings, they maybe to high.by gforce1 - Printing
Quotecozmicray I got a headache reading all the stuff on stacked belt bearings a drawing of two level system Let you guys rip it apart ???? This is how mine is buildby gforce1 - CoreXY Machines
Here it is in real life It is a selfmade version of this oneby gforce1 - CoreXY Machines
Here is another example. The belts are centered between the smooth rods in x and y-plane. Distance between the belts is 3mm in y.by gforce1 - CoreXY Machines
When it is moving up and stops when the endstop is triggered ( by hand ) , your endstop is on the max endstop pins of your rampsboard. Plug it on the zmin pins.by gforce1 - Repetier
With proterface or repetier host you get those screens and you can manualy move the bed. A slicer like cura or slic3r is build in.by gforce1 - Printing
Are you printing from sd? Turn the poti on the stepper (x-axis) a little bit clockwise. Have you still got the problem with homing the z-axis? If So set the retract while homing to 5 mm instead of 2 mm in CONFIGURATION_ADV_H //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: #define X_HOME_RETRACT_MM 5 #define Y_HOME_RETRACT_MM 5 #define Z_HOME_RETRby gforce1 - Reprappers
QuoteKoko76 Quotelkcl QuoteKoko76 It's almost like they wrote a document, to which you keep referring but refuse to read. In that document they call out a minimum recommended pulley size for GT2 pulleys, and surprise it happens to be 16t. Same document talks about speed as well. It's on the website (www.sdp-si.com), and available freely. Perhaps you might consider reading it before dispensingby gforce1 - CoreXY Machines
If you mean by flipping 180 degrees around that the motor is now on the other side then it is no problem. Just flip the connector. Replace your endtop on the original side.by gforce1 - Prusa i3 and variants
I have watched your video and i think the speed for non printing moves is to high. What are your settings in your slicer? Set them at app. 30 mm/ sec if it works you can try raising them step by step.by gforce1 - Reprappers
you can also lower the travelspeed for non printing moves in your slicerby gforce1 - Reprappers
You can set the extrusion length and speed in your slicer.by gforce1 - General
Slow down your accellaration in the firmware.by gforce1 - Reprappers