Supply3DPLA, we have in stock right now both 1.75 and 3.00 mm PLA Feel free to browse at your own lessuire! Supply3DPLA.comby Gorz - For Sale
Feel welcome at your own leisure!by Gorz - For Sale
Supply3DPLA.com One of the oldest fastest delivery of PLAby Gorz - For Sale
Supply3DPLA is charging up to supply at maximum during autum! Loads of stock of PLA!by Gorz - For Sale
We have now stocked up R1001 PLA again mostly 1.75 but also a 3 mm top up. Here is one new shade of RED quite dark in tone but getting lighter when printed. Black the most popular of them all Welcome at your own lessuire! /Bosseby Gorz - For Sale
Confirmation of R1001 plastic departured China!by Gorz - For Sale
We will soon have R1001 1.75 on the way from China as well as a top up of 3.00 mmby Gorz - For Sale
Supply3DPLA would like to inform that our load with NEW LINE PLA is home! You can already see all the colours and diameters in the shop! The NEW LINE PLA has had a long journey and now it rely has made a good jump forward. The spools are of very good quallity, the PLA is very good as far as we been able to test. We stil have a VERY low price for this PLA. ALL COLOURS IN 1.75 and 3.00 mmby Gorz - For Sale
SoftPLA 3mm as well as 1.75 mm LayWoo3D is now available!by Gorz - For Sale
We have lot's of 3mm Hi quallity R1001 filaments in stock stil. Soft PLA 3mm on it's way right now Laywoo-D3 3mm in stock Laywoo-D3 1.75mm on it's way right now On the way from China is also NEW LINE PLA 1.75mm and 3mmby Gorz - For Sale
We fight to keep the price of PLA down, SHIPPING within E.C. is handled byFedEx with tracking number! FEDEX RATES is corrected down!!! 1.75mm 2.7Kg rolls REDUCED PRICE 14% now only €39 = €14.40/Kg until stock end:s! NEW LINE PURPUR & YELLOW NOW €17.50 each until stock end:s A second brand of PLA 1.75 mm is here based on the process called R1001 this was the PLA that we fell in love with.by Gorz - For Sale
ONLY 3 MORE DAY'S! 10% OFF ANYTHING with coupon webi !!! DONT MISS IT! IT ENDS 2013-03-10by Gorz - For Sale
DUE TO HUGE INTEREST AND REQUEST, WE PROLONG THIS UNTIL 2013-03-10by Gorz - For Sale
SCHOOL HOLLIDAY OFFER! 1.75 mm PLA as well as 3.00 mm and Laywood3D until stock ends or 2013-03-03 10% OFF ANYTHING Makes 1K rolls at €18.45 Makes 2.7Kg rolls at €35.10 Any order at Supply3DPLA.com use webi as coupon and you will have 10% OFF anything. INT. SHIPPINGRATES lowered with up to 24% Use webi as coupon code at logout/payment for 10% on anything. Ends 2013-03-03by Gorz - For Sale
We experinced a small problem with our shipping cost calculation regarding Fedex rates. We have now fixed this and the calculations is now aprox 18-24% lower depending on the amount of PLA bought. All people that has payed internaional shipping have been compensated and we hope to have your continued trust. Best regards // Supply3DPLAby Gorz - For Sale
Supply3DPLA.com is now stocked again! Welcome if you feel like it! Regards Bosseby Gorz - For Sale
Now Supply3DPLA.com have printers as well! Our printers is deliverd more or less within 1 week, no more 8-10 weeks wait. Soon in shop double extruders ready built printer. PLA is in stock even if we had a very busy summer. As usual we are always open and ready to serve. Best regards Bosse // Supply3DPLAby Gorz - For Sale
We have now lowerd the price of some PLA down to €10 / Kg We also now have a sale of 1.75mm / meter experimental to check demand. We also have the mainboard for a Ultimaker for sale at €30 ARDUINO 2560 Welcome to visit EUROPES BEST WEBSHOP for PLA ! //Bosseby Gorz - For Sale
in both 1.75 mm as well as in 3 mm and ofcourse more colours ! Most welcome !by Gorz - For Sale
WELCOME!!! Best regards Bosse // Supply3DPLAby Gorz - For Sale
We are cleaning up some stock and offer truely low prices. Welcome to vrowse at your lesuire. Week 1 or 2 in Feb we will be stocked up ! /Bosseby Gorz - For Sale
I have now had enough of this junk bucket so I will sell the parts, if you try to use it as a printer it's your problem. There is 3 NEMA motors and mechanical end stops. A motherboard 2560 something from Arduino, it is all assembled into something called Ultimaker. It will probably never print anything decent so don't try that. But there might be some parts you can salvage. There is no heated prby Gorz - For Sale
We will give you the price no one else can! What about 10Kg , 5 Kg BLUE & 5 Kg Natural for under €60 Red 3mm 5Kg PLA good quallity at €49 that is €9.80 a Kg BLUE 5 Kg PLA now for €35 that is a whooping €7 / Kg Natural 5Kg PLA now for €49 that is €9.8 / Kg Welcome over to the PLA SHOP ON THE NET!by Gorz - For Sale
We have now in stock PLA from 12.80 / Kg for 3mm PLA We have now in stock PLA from 13.33 / Kg for 1.75 PLA New forwarder will lower import costs, we expect this to reflect on prices eventually New delivery agreement is soon signed and will lower EU/EC delivery We also have a WorldWide agreement coming, so we have competitive prices world wide! We are also in the process of keeping suplyby Gorz - For Sale
Well, at the moment I have 9 different suppliers that I am negotiating with.... But we only import PLA from sources we have tested on our own 3D printers. Actually thinking of buying a 3:rd one, perhaps a huxley 0.30 but we will see.. Bosse // Supply3DPLA.comby Gorz - For Sale
FisHNorway Wrote: ------------------------------------------------------- > Hey! > What would the price be for: > > 1kg silver > 2kg white > 2kg black > > PLA 3mm with shipping to Norway? Thanks! Unfortunatley I don't have silver in my stock, but take a look and tell me what you might like? We have 3mm White from the new source as well as black, I need to know more exby Gorz - For Sale
JoeDaStudd Wrote: ------------------------------------------------------- > Are you likely to re-add the 1kg or 1lb spools? > > Thanks, > > Joe Yes it is in stock now! Bosseby Gorz - For Sale
Supply3DPLA is up and in business!! WELCOME!! Bosseby Gorz - For Sale
We got a message right now that our PLA is through customs! According to our agent we should have the PLA in house tomorrow 11.11.11 and then we are ready to deliver! 3 mm PLA in 5 colours as well as 1.75 mm PLA in 5 colours ! All new rolls is spooled on a plastic roll according to our source and all waying 2.5 KG or 5.5Lbs indications are stil in the region of €40 each. We will arrange samplby Gorz - For Sale