Show all posts by user
People building or using RepRaps.
[USA] Kossel Mini Plastic Parts and Ships Quick - 12 years ago
Bill of Materials Printed parts This set of parts weighed in at 271g (without power supply brackets). 1x plate_1x.stl which includes the following parts: 1x End effector 1x Extruder 1x Retractable Z probe 2x Power supply bracket (optional) 3x plate_3x.stl which includes the following parts: 3x Bottom vertex 3x Top vertex 3x Vertical carriage 6x Endstop holder 3x Print surface holder Recommenby LordTovar - Plastic RepRap Parts for Sale
Re: [UK] Buying Reprap Parts (i3 I think) - 12 years ago
Let me know if you need those parts printed! Pm me through here and I will get it to you cheaper than the link. =]by LordTovar - Wanted
Fully Assembled RepRap Mendel Prusa 3d Printer (Ramps Board Not Included) - 13 years ago
Hello everyone! I have listed a Mendel Prusa Iteration 2 on Ebay. If you are looking for a printer this is perfect as I am going to ship it fully assembled. Everything is wired up. All you need is the Ramps 1.4 board or one of your choosing. This is the ebay listing Ebay Listing Fully Assembled Mendel Prusa Iteration 2- Ramps Board Not Included This machine will ship completely built. 5by LordTovar - For Sale
So I have an issue with my extruder - 13 years ago
I have a wades accessible extruder with a J-Head Mk IV-B Hot End for 3mm filament and a .35 mm nozzle. I am not sure what the issue is. It keeps stripping the filament when I try and extrude it. I tried loosening the 2 screws with springs to have less pressure. It is fine for about 20 mm then it just starts stripping. Could my nozzle be clogged? If so how do you folks suggest I get this taken cby LordTovar - Reprappers
Re: Just switched to sprinter need help - 13 years ago
Ahhhh thank you guys so much. I was being an idiot and had it already like you said //----------------------------------------------------------------------- // Inverting axis direction //----------------------------------------------------------------------- const bool INVERT_X_DIR = false; const bool INVERT_Y_DIR = false; const bool INVERT_Z_DIR = true; const bool INVERT_E_DIR = false; I swby LordTovar - Reprappers
Re: Just switched to sprinter need help - 13 years ago
I tried turning the const bool Z_ENDSTOP_INVERT = false; To true but then it would only go in one direction againby LordTovar - Reprappers
Just switched to sprinter need help - 13 years ago
Mendel Prusa Iteration 2 Ramps 1.4 Sprinter Firmware Pronterface running on Mac Mountain Lion MK1 Heated Bed Wades accessible extruder J-Head Mk IV-B Hot End .35 Nozzle for 3mm filament Nema 17 motors T 2.5 Belts on X and Y All the rods are Metric except the Z which is American Just switched to Sprinter firmware on my printer and I can go left right on X and back and forth on Y. Z howby LordTovar - Reprappers
Got a video with some questions on my build! - 13 years ago
First let me start with the setup. Mendel Prusa Iteration 2 Ramps 1.4 Sprinter Firmware Pronterface running on Mac Mountain Lion MK1 Heated Bed Wades accessible extruder J-Head Mk IV-B Hot End .35 Nozzle for 3mm filament Nema 17 motors T 2.5 Belts on X and Y All the rods are Metric except the Z which is American I would like some recommendations on some good firmware to correspond with Prby LordTovar - Reprappers
Slicer in Repetier issue - 13 years ago
I downloaded the latest Repetier host and uploaded the Repetier firmware to my Ramps 1.4 board. I am trying to slice an stl and when I do it gives me an error message (See photo) What could be causing this?by LordTovar - Reprappers
Having issues with print. (Video link) - 13 years ago
youtube.com/#/watch?v=DpZM0nodakE I'm having issues with my prints. I set the mm per second on the EEPROM settings in Repetier-host for my MBP. I was tring to print out a coin and this is what it does. I fixed the Z endstop so it's two pieces of paper distance between nozzle and bed. Any ideas as to why this is doing this? I'm printing ABS at 220c and bed is at 110c .35 mm nozzle and 3mmby LordTovar - Reprappers
Z axis issues - 13 years ago
I jog all the motors in each direction. X and Y seem to be working. I go up on the Z and it just turns so so slow and I tell it to go up 100mm and it goes up about twenty. I used the Josef Prusa MM per step online tool and set the lead screw 2267.718321038048 steps per mm value and changed it in the firmware. I am running Repetier on my 2011 MBP. What I'm curious about is why is the motor so slowby LordTovar - Reprappers
Re: What are my voltage readings and more questions 
- 13 years ago
Also I just remembered that the z threaded rods are standard and everything else is metric. How do I fix this to reflect in the firmware and do I even need to?by LordTovar - Reprappers
Re: What are my voltage readings and more questions - 13 years ago
I sent that M119 code and got < 9:54:51 AM: x_min:H y_min:H z_min:H any ideas as to what that means? Can you explain how to check the z steps per mm value and the easiest way to set this?by LordTovar - Reprappers
What are my voltage readings and more questions - 13 years ago
What are my voltage readings supposed to be powering the board and is it supposed to be VAC or VDC? On a Fieldpiece HS36 Multimeter. Thanks! Its on the Z axis motors. They aren't getting much power when I jog it on Repetier on my Macbook Pro. X and Y axis work when jogged and move correctly. I hit 100mm on the Z to go up and it slowly turns and maybe goes 15mm up. Then when I hit -10,-100 it dby LordTovar - Reprappers
Re: Repetier-Host Mac 0.53 Help - 13 years ago
Im trying to upload the repetier.pde into arduino and have already changed the baud rate and board type. I compile the sketch in Arduino 1.0.1 and it looks good. I try and upload and it gives me this (Binary sketch size: 61,866 bytes (of a 258,048 byte maximum) avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avby LordTovar - Reprappers
Re: Repetier-Host Mac 0.53 Help - 13 years ago
And would you be kind enough to elaborate a little on getting the Repetier firmware onto the the board itself. I think thats what the issue is. Thanks!by LordTovar - Reprappers
Repetier-Host Mac 0.53 Help - 13 years ago
Repetier-Host Mac 0.53 is what I downloaded. Can someone help me. I plugged in the printer and the printer starts moving the x axis back and forth and the y back and forth and z up and down. I hit connect in repetier and and the printer stops moving for a moment, then it keeps doing the above. I also can hit the emergency stop in repetier and stops but then continues. Can someone please help.by LordTovar - Reprappers
Ramps 1.4 to a Mac running mountain lion - 13 years ago
Hello I am wondering what the best software and firmware is best suited for this configuration. Any tips would be appreciated!by LordTovar - Reprappers
Re: Please help me with my power supply and wiring! - 13 years ago
Are the two V+'s both supposed to be at 12 V?by LordTovar - Reprappers
Mechanical Endstops for RAMPS 1.4 - 13 years ago
So I have a basic mechanical endstop and I am wondering if it is absolutely necessary to have the 1k Ohm resistor on the "C" part of the endstop? I just dont have them at the moment. It is getting plugged into a RAMPS 1.4 board. Much appreciated.by LordTovar - Reprappers
Please help me with my power supply and wiring! - 13 years ago
So I am looking for help. I have an ATX 2 PSU. The photos I have included have all the specs of the PSU. I have RAMPS 1.4. Please tell me if the two sets of (1Black, 1Yellow) are the correct cables for the 4 ports on the RAMPS board. I just really dont want to blow anything up and lose money. Second question is I have a Heated Bed MK1 all wired up. Im kind of confused about where on the RAMPS boaby LordTovar - Reprappers
Please assist me with my 6 wire NEMA17 motors. - 13 years ago
Hello, I am building a Mendel Prusa Iteration 2. I have 5 NEMA 17 motors. They are 6 wire. I am hooking them up to Ramps 1.4 which have a 4 cable design. My question is which wires do I solder and which two do I leave off? I broke them up to three groups of two as you can see in one of the two photos. I feel like the 2 middle ones I should as I tried touching each pair together and I felt the rby LordTovar - Reprappers
Re: Hello, Please assist me with my PSU - 13 years ago
Thanks I shall. Very excited about getting it finished.by LordTovar - General
Re: Hello, Please assist me with my PSU - 13 years ago
I would just like to get some confirmation as this is my first build and am kind of skeptical about altering it and not being able to return it. Any help would be appreciated.by LordTovar - General
Hello, Please assist me with my PSU - 13 years ago
Hello, I just bought a IN WIN IP-S300FF1-0 (Model number) Will this work for my Reprap Prusa Mendel I2 W/ Ramps 1.4 and heated bed?by LordTovar - General