Show all posts by user

EINSY RAMBo 1.1a vs 1.1b - 6 years ago

Can anyone tell me the difference between EINSY RAMBo 1.1a and 1.1b? Thanks

by motownlucas - Prusa i3 and variants

UBL mesh probing fails after first point, Marlin 2.0.5.3 - 6 years ago

I had this same issue with Marlin 1.1.9 ages ago and finally gave up on it. Just updated to 2.0.5.3 and decided to revisit it. As the topic states, unified bed leveling stops after the first mesh point is probed with no error message that I can see. The LCD controller beeps, the probing stops, and that's it. I tried first with the default 10x10 grid and it stopped probing about halfway through th

by motownlucas - Firmware - Marlin

Re: 2.0 Reset button not working on full graphic smart controller - 7 years ago

QuoteDust GLCD don't have a reset button. They have a Stop button (internally its called KILL_PIN ) Marlin needs this to button to be held down for a while. To stop you accidentally stopping a print. Hmm, I was thinking it worked in 1.1.9 on my printer, but I guess I was using the host for reset, not the LCD. I would have sworn otherwise. Oh well. Thanks though.

by motownlucas - Firmware - Marlin

Re: 2.0 Reset button not working on full graphic smart controller - 7 years ago

Cool, thanks. Links to config and config_adv below. Hopefully I shared them properly, not too familiar with Google drive

by motownlucas - Firmware - Marlin

2.0 Reset button not working on full graphic smart controller - 7 years ago

Marlin 2.0 on Rambo with Full Graphic Smart Controller. Reset button on the Rambo works fine; reset button on the smart controller does nothing. Any ideas? Setting missed; bug?

by motownlucas - Firmware - Marlin

[NEVERMIND] 2.0 Travel limits not being respected - 7 years ago

Just built an MPCNC and this is my first experience with Marlin 2.0. Issue I'm having is that I set x and y bed size in the firmware and the travel limits after homing were set to those variables, however I can still jog the machine past those limits. UPDATE: I just found the software endstop settings. Everything is working now. I thought setting the "max travel limits after homing" values was g

by motownlucas - Firmware - Marlin

Re: Need help switching to Repetier firmware from Marlin - 12 years ago

Awesome, thanks!

by motownlucas - Repetier

Re: Need help switching to Repetier firmware from Marlin - 12 years ago

What are all the EEprom settings anyway and how do I find out what they are set to? Is there a way to reset them all back to fw values?

by motownlucas - Repetier

Re: Need help switching to Repetier firmware from Marlin - 12 years ago

EEprom is enabled. Turns out it was my retract speed setting in Slic3r. Marlin did fine with 30mm/s, but Repetier fw needs it cranked down to 15mm/s to prevent skipping extruder steps?? Something doesn't seem right with that.

by motownlucas - Repetier

Need help switching to Repetier firmware from Marlin - 12 years ago

I was up and running pretty well with Marlin firmware and RepetierHost, but I wanted to see what the Repetier firmware could do.... X, Y, and Z steppers seem to be fine, but the extruder motor just hums/buzzes when running a job. The manual extrude and retract functions work just fine. My uneducated guess is that it is trying to move too fast, but I tried to dial things down in the firmware bel

by motownlucas - Repetier

Re: HELP! - First build Pre-Flight test CRASH - 12 years ago

Quoterogerclark On the new RAMPS I also cut the PCB track to prevent the same thing happening again. I just had the same thing happen to me - voltage regulator went poof. No idea why. Can you show what track you cut on the RAMPS?

by motownlucas - Reprappers