I have a few old optical sensors from a regular paper printer I took apart awhile back along with the steel rod (3mm, not the recommended 2.5mm). Will these sensors work (granted if I figure out the wire configuration)?by Okeasy - Smart_Rap
I'm having an issue with KISSlicer where whenever I slice an object and go to print, there is some sort of Z offset of about 0.1 to 0.4, KISSlicer does amazing print quality (from what I heard) and it would be nice to get it to work properly, images of my settingsby Okeasy - Experimental
I Have an E3D Lite6 and im not entirely sure if it came with a 12v heater cartridge or a 24v heater cartridge, is there any way to tell other than having a multimeter? My multimeter recently failed on meby Okeasy - Reprappers
Quoteffneil Try changing the baud rate. #define BAUDRATE 250000 this link mentions something about a ICSP pin being used to program it with new firmware, but I have not been able to find anythingby Okeasy - Prusa i3 and variants
Quoteffneil Try changing the baud rate. #define BAUDRATE 250000 I honestly think Im doing something wrong , I changed the baudrate, verified, uploaded, blue LEDs flashed from the mks board and still nothingby Okeasy - Prusa i3 and variants
Quoteffneil Yes I have it working, but the steppers are not going ok the correct distance, and the LCD is ok but not the way it was when I first turned it on. Can you share the files you have and/or point me in the direction to get the files from the company? Thanks P.S. Attached is Merlin config that work but needs lots of tuning. I have the files, they sent me them so ill share it here shoulby Okeasy - Prusa i3 and variants
QuoteVanbot OK I don't like acrylic frames anymore. At least not acrylic bed frames. Mine broke with a minor impact. well I cant exactly say im a fan of acrylic frames. I will say however they look cool. But I guess if the purpose of a printer was to look cool rather serve any use than mine is doing a hell of a job, considering I haven't been able to get the firmware to work again.by Okeasy - Prusa i3 and variants
Quoteffneil I did the same thing and have loaded another merlin config file. It works but the setting are not correct. I too need to original and can't find any info on the internet wait, so you uploaded a different marlin config and it works now as in axis moving, LCD works etc.? because the company sent me the configuration file as well as the main marlin files and I tried uploading the filesby Okeasy - Prusa i3 and variants
hey, I recently "messed" up my firmware when I was changing something inside the firmware to accept my e3d LITE6. I connected my printer, shows up on port with name as "COM6" in arduino I make my adjustments to the code and verified it, uploaded, next thing I know my printer isn't working. Haven't got it to work since then, any chance you have that working configuration.h file?by Okeasy - Prusa i3 and variants