Hello In the previous version of the Merlin there was a solution that I liked very much: after G28 each of the axis was coming back a bit. In my current version it isn't. Is there a chance to change it or I'm must use endstop_noise_filter or use an hardware solution with a capacitor?by 11Master - Firmware - Marlin
I have an enclosure, glass with PEI on the bed and no problem with sticking. There only problem is what to choose direct or bowden. I was wondering if that setup can do good job. I have on my mind sentence that if something is for all then it is for nothing. But You all have told that it should work; I will try on my own then.by 11Master - Reprappers
OK, Thanks, I will fight with it.by 11Master - Reprappers
But I'm still wondering what with retraction and how the prints looks. Before with direct I have around 2mm for PLA, ABS With teflon tube and prints look ok. Now with full metal the maximum is allmoust 1mm, everything above clogged the nozzle :/ I'm still setting all and PA and flex still waiting for me and I'm curious if someone did it and how the prints quality?by 11Master - Reprappers
Hello. Almost 1 year I used a heat break with PTFE with success for PLA and ABS+ (Direct). Then I have buy a full metal titanium heat break and I try to force to print with mentioned materials (Bowden). I'm wondering if is a chance to make a printer for most common materials, I mean: rubber, pla, abs(+), PET-G and NYLON (PA-12). Has someone did something similar?by 11Master - Reprappers
First, thanks for dedicated time; I saw You have edited the posts many times. And even You have prepered the hardware. ... I have made the hardware months ago and I have tested it under arduino with success. I know the I2C address (0x27 it is PFC8574T). ... The LCD_SAINSMART_I2C_2004 work like You said. The booting is a little bit longer (i was wondering if it is the ...end ) but I save about 20%by 11Master - Firmware - Marlin
Anyone ? I don't want whole instruction step by step, only a few tips. I'm looking for information where to look where I can change: 1)encoder pins x3 Propably in pins_ANET_10.h but how to say marlin about SDA and SCL pins where to change it? At the standard configuration in HD44780 and 2004LCD SDA and SCL are connected to DB6 and DB7. 2)how to enable only 2004LCD+I2C? without preconfigured enby 11Master - Firmware - Marlin
Hello. I'm reading this forum for a while but now I have a problem with a printer mod. I'm talking about: I have made the hardware part some months ago and then I was used Marlin/skynet. Now I'm using v.1.1.9 and I have problems with implement this mod in new marlin. Can someone tell me generally which part should I change to use 2004 LCD with I2C controler and encoder? I try to understand marliby 11Master - Firmware - Marlin