Show all posts by user
People building or using RepRaps.
Re: How to set custom home position and drive directions - 2 years ago
Okay I have made some progress by just seeing the code I posted, I changed the G1 H1 Y300 F54000, and reversed my drive direction, additionally used G92 to set my position to Y290 after it homes. the printer is now doing what I want it to. However, when homing it just crashes into the frame and stops after a few skipped steps. The only thing I changed was the -300 to 300 value and added the set pby oBezruki - Reprappers
Re: How to set custom home position and drive directions - 2 years ago
Hi DC42! Yes I'm running RepRap Firmware 4.3.5, please find the configs copied below. Thanks, Jake ; Configuration file for Duet WiFi (firmware version 3.3) ; executed by the firmware on start-up ; ; generated by RepRapFirmware Configuration Tool v3.3.10 on Fri Jan 21 2022 22:14:04 GMT-0500 (Eastern Standard Time) ; General preferences M575 P1 S1 B57600by oBezruki - Reprappers
Re: How to set custom home position and drive directions - 2 years ago
I can get the machine to make my home position X0 Y290 Z0 however the same problem still persists, I can only add positive values or it will crash into the frame. I cant simply reverse the direction of the drive either because the endstop is at YMAX, when flipped it homes in the wrong directionby oBezruki - Reprappers
Re: How to set custom home position and drive directions - 2 years ago
So I would have to add the G92 code X0 Y290 Z0 to my config? Or just my homing macros?by oBezruki - Reprappers
How to set custom home position and drive directions - 2 years ago
Hey everyone! I have come back to RepRap from Klipper, and I would always flip the Y axis on my prints while using RepRap because my limit switches are at XMIN, YMAX and ZMIN. Its a printer I retrofitted with opensource hardware and used as much of the original components as I could. In Klipper I was able to set my drive to move in its normal direction, as well as the end stop being my max, butby oBezruki - Reprappers
Re: Converting CubePro to RepRap - 3 years ago
Ive read through that feed, and a few other ones I found through links, but it doesn’t show anything ever coming to fruition, just a concept, if I wasn’t a noob at open source hardware and software I would attempt something and post my results. Maybe someone can help mentor me? I reached out to TommyDee to see if that board ended up becoming a thingby oBezruki - Reprappers
Converting CubePro to RepRap - 3 years ago
Hey everyone, I recently procured a cubepro duo for cheap and I like it so far. My biggest disappointment in the machine is the proprietary slicing software and the inability to control print speed. I’ve been lurking around the forum and I can’t believe the amount of useful information on here, I’ve done quite a bit of research and it is hard for me to get a baseline on what exactly I will needby oBezruki - Reprappers