Show all posts by user

Re: Run away nozzle temp - 5 weeks ago

I've changed them twice i think I have another one I'll try it thanks for the advice

by caminoracer - General

Run away nozzle temp - 5 weeks ago

So I'm working on ender3v2 mostly stock had a problem with the therapister changed it with a new harness for both hot end heater and therapister now it will randomly change temps on both bed and hot end tried a factory rest to default and still am getting the problem temps go all the way up to 240 and 85 don't want to burn it down thanks

by caminoracer - General

Re: Blue screen on RepRapDiscount_Full_Graphic_Smart_Controller HELP - 2 months ago

Thanks for that I loaded the firmware and the reprap still has just the blue screen so I started changing connector upside down side to side still only blue screen at one point I did have the beep when pushing the button thanks for the help I think I'm going to buy another one and try again

by caminoracer - Reprappers

Re: Blue screen on RepRapDiscount_Full_Graphic_Smart_Controller HELP - 2 months ago

This was the instructions we tried to follow, don't do much coding so had a hard time finding files, I hope I'm sending stuff that helps

by caminoracer - Reprappers

Re: Controller lights on when axis are moved manually - 2 months ago

Thanks , I just thought it was strange my enders don't do it, this taz is a 24volt

by caminoracer - General

Controller lights on when axis are moved manually - 2 months ago

Working with a taz 5 and with both power switches off and I move the bed backwards or forward the blue back light comes on also when I move the tool head side to side, there is no power on but the light is still coming on any suggestions thanks

by caminoracer - General

Re: Blue screen on RepRapDiscount_Full_Graphic_Smart_Controller HELP - 2 months ago

How do I post them on here

by caminoracer - Reprappers

Re: Blue screen on RepRapDiscount_Full_Graphic_Smart_Controller HELP - 2 months ago

I will get all that for you when I get home on Friday, Newbie on firmware and updates

by caminoracer - Reprappers

Re: Blue screen on RepRapDiscount_Full_Graphic_Smart_Controller HELP - 2 months ago

Sorry I have a taz5 with a rambo 1.3l motherboard, the controller on it has problems with the knob jumping from one to another in the menu so it came with a RRD full graphics lcd smart controller l purchased the adapter and tried to follow the instructions on the lulzbot website and every time I run comply it has errors I've tried everything I can think of Thanks

by caminoracer - Reprappers

Blue screen on RepRapDiscount_Full_Graphic_Smart_Controller HELP - 2 months ago

Trying to install it on my lulzbot taz 5 bought the harness and tried to install firmware but it keeps coming up with so many errors please help someone

by caminoracer - Reprappers