Okay forgot to add This is on the 12864 full graphic LCD controller That I bought from ebay 15.5 US Cheers!by Bobyni - General
I used Paint to create my own logo and just replaced the big logo section with mine in DOGMbitmaps.h needed to uncoment #define START_BMPHIGH and respecting the size of 112x38 using "LCD ASSISTANCE" to convert BMP to hex file set as Bite orientation = "Horizontal" size endiannes = "BIG" save the output into a "filename.txt" and copy / paste Of course you would need to modify in the Config.h thby Bobyni - General
I saw couple lines that were not commented and was nothing to do with the firmware!! Check "click" " submenu items-this one ..." And win merge is the way to go!by Bobyni - Prusa i3 and variants
hi Viktor, no , this Tq10X model does not have the step/dir or cw/ccw pulse information. the other model has it: TQ10SD.(but I don't have it) on the spec of the TQ10X it says it has 5 user define programmable input using TTL signal level...... I believe this is where it can be programmed to be identified for different axis. PLS see attached spec screen shoot. I am lacking of software skill aby Bobyni - Reprappers
What version of Arduino IDE YOU R USING. If different than 1.0.6 them it might be the issu! Downgrade from 1.6 ( if you r using the latest one) to 1.0.6 And you should be able to compile! I went through something similar ... " variable ..." Don' t remember what it was. Fixed by downgrade to the older version of IDE and worked! Good luckby Bobyni - Reprappers
Hi Viktor, Thanks a lot for your info! I've attached the servo driver controller's connections for your review. It uses RS232 tx/RX Also it uses dedicated servo motors from the same Parker companyby Bobyni - Reprappers
I hope that the discussion could go on, so we all learn more. I am like many of here, trying things and gaining know how. If cost was not taking into consideration, how could I get the motor to work in a 3 D printer? Definitely controller is a must, but what type to f controller? I do have used salvaged Parker's compumotors TQ10s that would give me the controlling power to each axis' servo mby Bobyni - Reprappers
Pls let us know what was wrong, so people learn this way!! Cheers! You r welcome!by Bobyni - RAMPS Electronics
Your problem could be found at YouTube under danger Ramps... Something like that. You probably have wrong end stops connected and the. Power regulator on the mega has fried! Good luck!by Bobyni - RAMPS Electronics
Maybe power regulator got fried on MEGA. When connected the end stops backward, instead of SIG you might have sent +5V through it. Buy another Mega and make sure you wires correctly this time. Good luck!by Bobyni - RAMPS Electronics