Show all posts by user

Re: Migbot Prusa i3 Unofficial Support Thread - 6 years ago

Quotetkin 1) The bed takes a verrrry long time to heat up to 100 or 110 for printing ABS. Will a 24V power supply fix this? What is very long(15 minutes or over an hour). The heat bed should heat up as fast as you supply enough Watts (Watts= Volt x Amps; a 12v 20amp PSU has same power output as a 24v 10 amp PSU).....until your heat bed fails. You should try with cork isolation mats. Both bel

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 6 years ago

I am also in the process of putting mine together, not done yet. See if you can use some of it. But great link some useful info. Migbot Ultra Prusa I3 - Putting it all together.

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 6 years ago

@Ukemaxxer I belive that dumping the FW is a bit overkill since it's = Marlin. And as long as you keep an updated Configuration.h, you should always be good.

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 6 years ago

@jcabrer It's do not really mater whether the MKS boards are open source or not. It's just normal Marlin fw. As you say, you can even exchange the board with a Ramps 1.4+ Mega. So I guess the MKS is simply to make it cheaper for them. Nothing that really breaks the opensource part of it. And also, I have gotten fw &parts files from them. Only thing I have not seen is frame. But thats pretty m

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 6 years ago

CORRECTION! The 1.02 FW is for the large bed!

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 6 years ago

Got a copy of the latest MigBot/Marlin fw. MigBot firmware Marlin 1.0.2 Large Bed

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 7 years ago

Hi, would anyone please share the "Auto leveling Instructions and Manuel.rar" file dropbox/googledrive/ect ??

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 7 years ago

n/a

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 7 years ago

n/a

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 7 years ago

Have you tried to swap motors/connections between z and x/y ?

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 7 years ago

Quotesteaneb Managed to finally get the stl files for the printed parts. If yours arrived with missing and deformed parts as mine did, you'll probably want a copy. FYI the extruder stepper frame is available in aluminium and is worth having to contact the dealer to get one. Cost was around $8USD. Where did you find the extruder frame in aluminium ??

by magiske - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 7 years ago

Just ordered one. Looks good for the price. And tinkering to get it to work "perfect" is part of the fun

by magiske - Prusa i3 and variants