QuoteMach QuoteAgedashi I'm trying to upgrade to therippa's new version of marlin so I can get the full graphics LCD working. I'm porting my settings over but i noticed that the Z-Step value changed from 3840 to 4000. Which one should I be using with the original threaded rods? Thanks! 4000 Thanks for the quick reply. Any reason for the change? I assume the default was 3840 previously... I doby Agedashi - Prusa i3 and variants
I'm trying to upgrade to therippa's new version of marlin so I can get the full graphics LCD working. I'm porting my settings over but i noticed that the Z-Step value changed from 3840 to 4000. Which one should I be using with the original threaded rods? Thanks!by Agedashi - Prusa i3 and variants
Great pictures you took! I enjoyed reading through it and will be keeping tabs on your thread ! Would you mind posting the thingiverse links for the things you printed?by Agedashi - Prusa i3 and variants
forums.reprap.org/read.php?4,512329,519624#msg-519624 Firmware issue that most of us ran into following the guide.by Agedashi - Reprappers
doubled posted.by Agedashi - Prusa i3 and variants
Almost finished with my enclosure. Still dialing down the settings though. Extruder clicks if I go below 210C with PLA at default speeds... print quality sucks at that high of a temp. Any ideas?by Agedashi - Prusa i3 and variants
. Stick the themistor in the hole in the center of the pcb and tape it down with Kapton tape.by Agedashi - Prusa i3 and variants
QuoteDan_FolgerTech Quoteanimoose A follow up to an earlier post: if you want to see what I mean by the RAMPS board being horrible, look at this picture: [2.bp.blogspot.com]. We've switched vendors and our new ones are also color coded. We are pretty happy with them, I don't know what happened with our previous vendor but the soldering was starting to get pretty sloppy towards the end it seems.by Agedashi - Prusa i3 and variants
I'm having some issues where I find the extruder will start clicking... I think this is because my hotend is becoming clogged somehow causing it to need a large amount of pressure to extrude. Any ideas?.by Agedashi - Prusa i3 and variants
Quotek.fernandes44 Is it Ok to post issues/problems we're having to this thread? Of course, we're all here to help each other!by Agedashi - Prusa i3 and variants
Yup, changing #define X_HOME_DIR 1 fixed my problem... My x-endstop is on the right.Thanks joe/mark! However, my prints are coming out mirrored now. Follwed this to fix my problem.by Agedashi - Prusa i3 and variants
QuoteJoeH So I finished assembling the printer LATE last night. Tonight, I followed the config guide, and everything went fine till I got to step 8... homing the X and Y Axis. The Y axis homed fine, but the X did not. Every time I click home X, it only moves about 10 mm (didn't measure). I can keep clicking home till it get to the limit switch. When it gets to the limit switch and triggers it, itby Agedashi - Prusa i3 and variants
Could someone measure the dimensions for me? I'm planning to build an enclosure for it before it comes. Thanks!by Agedashi - Prusa i3 and variants