Show all posts by user

Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago

thanks both for helping.have to read and learn more about G code. going to try the commands you provided. i am new in 3d printing and and still learning from you guys

by insanegr - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago

@gotswrv thanks for helping and forgive me for my ignorance. how should G code has to be?

by insanegr - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago

@Ax it might be stupid but gonna ask. copied start and end G code from Migbot Prusa i3 wiki and when my prints end my z axis goes to Z10 hight does not lift to go +10 mm above the current z axis position(if my print hight is IE 20 mm it will move z axis down to Z10 and will hit my printed part). have found g code line and deleted it and all are fine now. G0 Z+10 E-5 F5000; Lift Z Axis +10 - ret

by insanegr - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago

I can say for my one month knowledge in 3d printing Ax's firmware works great. the only thing we have to do is calibrate our printer and flash again with the new (calibrated) settings. now firmware is done from the to do list and going to bed problems. waiting for a glass and a ssr relay and connect a new psu. i have done some printings but need to fix the bed temp problem and the crappy alu pla

by insanegr - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago

thanks Ax for the info remembered now reading a member that had a problem with a motor but had forgot about it. trying to figure out what was the problem i read some interesting things and found out more. will report back when i flash again my board with the right firmware cheers

by insanegr - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago

@wes78 everything was working as they should before and had made my firsts prints too with extruder's motor at E0. the only thing i wanted is to store my calibrations settings and for firmware i choose Ax's firmware and copied the configuration.h file for my printer and flashed it. after that i had to connect extruder's motor to E1 to work again .link for MKS pic is anyone else using Ax's firm

by insanegr - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago

Quoteinsanegr EDIT: seems things are not ok now had some time to spend with the printer and wanted to finish my extruder calibration to see if steps are ok. preheated my nozzle through repetier so i can extrude filament to see if its ok and now extruder output is not working. swapped motor cables on board with x axis and extruder motor worked fine through x axis output but x motor didn't work on

by insanegr - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago

Ax thanks for helping i will dig more to find out more about mosfets and get a SSR ordered and what ever comes first will be installed. i don't really care my PSU to be controlled by the board, prefer switching it on and off my self so i will have the control of it.not to be a wise guy but i think you was referring to 20A psu and not a 20W as 20W at 12v is something like a 1.5A psu i want to repo

by insanegr - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago

hi Ax thanks for your help. i have no doubt that your firmware doesn't work well but i wanted to clear things out in my head and your answer did it. have seen your 3 printers working i was impressed so your firmware will be flashed to my board. so you prefer flashing board when making changes instead of saving it on the printer with eeprom enabled? i know i can screw things up as my knowledge is

by insanegr - Prusa i3 and variants

Re: Migbot Prusa i3 Unofficial Support Thread - 8 years ago

hi all i am really new in 3d printing and this 36 page thread was helpful to understand a lot of things thanks too the knowledge of some members , who are willing to help too. i have bought one electron - migbot 3d printer(standard-bed without auto bed levelling as i knew i could do it paying less) from the known on-line store with the known quality and customer support. before buying the print

by insanegr - Prusa i3 and variants