I figured out the problem to my runaway bed temperatures. On the board, the mosfet heatsinks were touching causing the runaway temperature. Funny that I figured that out, THEN found this thread. ha runaway bed tempsby b0bl0blaw - Prusa i3 and variants
Thanks all for the help! I have not checked the jumpers yet but I bet that is it. Until I can find another jumper or make one, am I causing any damage or negatively affecting my prints in any way? I successfully got ABS to print - I used a small piece of wire I found that was about .35mm and twizzled the nozzle as you suggested. I figured out the problem actually was that my bed was slightly tooby b0bl0blaw - Prusa i3 and variants
I just built a folger prusa i3 2020 this weekend and it went great other than the left x-carriage holder cracking when I inserted the 8mm rod. Additionally the kit came with sk10's instead of sk8s - temporarily I wrapped the ends in masking tape until they had a diameter of about 9.7 and shoved them into the sk10s. Seems to be working OK. I plan on contacting Folger for replacement parts but haveby b0bl0blaw - Prusa i3 and variants