Show all posts by user

When move axis with rotary encoder just after 3 seconds the 3d printer do what i said. What can i do to do as i rotate.... - 7 years ago

When i go to menu move axis and try to move one of the axis just after 3, 2 seconds the printer actually start working ... why ? and how can i do fix this ?

by Lucas Azevedo - Firmware - Marlin

Best extruder for prusa i3 and holder - 8 years ago

OK soo i need to buy a new extruder and a new holder for this prusa i3 ... Any advice ? I saw that is very dificult to find the support .... anyone can help me ?

by Lucas Azevedo - Prusa i3 and variants

Re: Chinese eBay 3D printer - Story so far, and request for advice - 8 years ago

But he have too below ... Guys i installed one proximity sensor but the printer isn't making the grid move just the normal mechanical stops ... can anyone help me ? //=========================================================================== //=============================Mechanical Settings=========================== //====================================================================

by Lucas Azevedo - Prusa i3 and variants

Grid in auto home not working - 8 years ago

Hy everybody... I bought a proximity sensor and he is working but the old endstops was mechanical (and x and y is still mechanical just changed Z ) Anyone can please tell me why in the hell isn't the grid working in auto-home? The files are attached to topic #define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line) #define Z_PROBE_REPEATABILITY_TE

by Lucas Azevedo - Firmware - Marlin

Re: Chinese eBay 3D printer - Story so far, and request for advice - 8 years ago

QuoteMCcarman IMHO but as an engineer:- I would put the brass threaded inserts on the Z screws at the top of X carriage. If they are on the bottom then they are very close to the motor coupling which is constrained in position so you pick up any eccentricity from the couplings and start fighting with the plane guide rods. When they are on top they are further from the coupling so the threaded rod

by Lucas Azevedo - Prusa i3 and variants

Re: Chinese eBay 3D printer - Story so far, and request for advice - 8 years ago

Quotehoxsiew QuoteLucas Azevedo Yes is just the x axis but i don't know why is this occurs..... One more thing does anyone applied here the proximity sensor? Can you guys show some print from this printer... Mines aren't soo well The one I got had no mention of a proximity sensor. I assume you mean something for auto-leveling the bed. As I said, that wasn't included in my kit. I just set the

by Lucas Azevedo - Prusa i3 and variants

Re: Chinese eBay 3D printer - Story so far, and request for advice - 8 years ago

Yes is just the x axis but i don't know why is this occurs..... One more thing does anyone applied here the proximity sensor? Can you guys show some print from this printer... Mines aren't soo well

by Lucas Azevedo - Prusa i3 and variants

Re: Chinese eBay 3D printer - Story so far, and request for advice - 8 years ago

Quotebrs1701d QuoteLucas Azevedo Hy Guys , Finally solved the problem with my printer by justing leveling with a manual leveler but i still have a problem... my prusa is doing too mutch noise.... is this a normal problem ? It's whether or not the noise is normal, these machines aren't that quiet. How about visiting youtube and listen to some of the printers running? This will give you an idea i

by Lucas Azevedo - Prusa i3 and variants

Re: Chinese eBay 3D printer - Story so far, and request for advice - 8 years ago

Hy Guys , Finally solved the problem with my printer by justing leveling with a manual leveler but i still have a problem... my prusa is doing too mutch noise.... is this a normal problem ?

by Lucas Azevedo - Prusa i3 and variants

Re: Chinese eBay 3D printer - Story so far, and request for advice - 8 years ago

Hy everybody... Soo i bought the exact same 3d printer and i can't calibrate the z axis ... i encounter 2 problems 1º doing the auto home the extruder get out of the bed 2º the extruder is crashing in the bed ... Anyone facing the same problem ?

by Lucas Azevedo - Prusa i3 and variants

Re: Help!! Z is crashing my tables !!! - 8 years ago

QuoteSteveRoy What does an M119 sent to the printer show you when the z stop isn't closed? What does it give when it's closed? Steve I will check asap and tell you

by Lucas Azevedo - Prusa i3 and variants

Re: Help!! Z is crashing my tables !!! - 8 years ago

QuoteMCcarman Im no expert but. // these are the offsets to the probe relative to the extruder tip (Hotend - Probe) // X and Y offsets must be integers #define X_PROBE_OFFSET_FROM_EXTRUDER 0 #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 Is telling the printer your probe is where the extruder nozzle is so you need to change these. Also make sure the sensor

by Lucas Azevedo - Prusa i3 and variants

Help!! Z is crashing my tables !!! - 8 years ago

Hy everybody ; Soo i bought a DIY prusa i3 and when i mounted all i did auto home and then the Z axis was drilling my bed, bending the bed. Soo i order a new one ( the other was really bend ) i edited almost everything about Z and still it's heating on the table ... but now i stopped with repetier (clever way) i don't know what i'm doing wrong but please help me guys ... The seller it's not co

by Lucas Azevedo - Prusa i3 and variants

Need some help guys Print not very good - 8 years ago

Hy everybody . I'm new on this world and I need some help. Soo I bought a pruza i3 pro b (I think that it's, appears on led screen) . I don't know why but my printings are weird. I was looking for random print and fount out some small minecraft tools. Here is a video of prusa printing And this was the state of the faces (I destroy the piece to see both faces) I don't know why is happ

by Lucas Azevedo - Prusa i3 and variants