No, I didn't tin them.by mfisch - Prusa i3 and variants
I am still trying to get my 2020 tuned. I have 2 adobe'ed ( not quite bricked) megas, and must remove the 3rd on to do firmware changes. The megas work but.are not seen as com ports by arduino ide. The printer can be controlled and the ide reads the mega info, just will not program them.They will not program on other computers and are the megas from Folgertech. They programmed in the printer onceby mfisch - Prusa i3 and variants
I have been leery about those green connectors. The strip 1/8" of wire is bs, at least 1 wire falls out weekly with maybe 6 prints. 3/16 to 1/4" seems to be much better.by mfisch - Prusa i3 and variants
Quotetjnamtiw Quotecrumb4life Quotemfisch The mega would show under Devices and printers in control panel for windows.Since your manual control was via the computer, it is seeing the mega.Maybe your comm settings are off and you are dropping characters or commands. It seems like mine is dropping characters or commands. I will have to try using the sd card.The Pi came in so I have been trying toby mfisch - Prusa i3 and variants
The mega would show under Devices and printers in control panel for windows.Since your manual control was via the computer, it is seeing the mega.Maybe your comm settings are off and you are dropping characters or commands. It seems like mine is dropping characters or commands. I will have to try using the sd card.The Pi came in so I have been trying to get that setup with Octoprint. It is bootby mfisch - Prusa i3 and variants
You said it works manually - was that using the LCD controller or Repetier/Pronterface? Does your computer show the MEGA as a device?by mfisch - Prusa i3 and variants
I had lots of the line number errors along with unknown command errors.I was printing a filament holder side/end. Sl3cr was looking ok but I think the filament bound up ad caused missed steps shifting layers bay about .25". Cura didn't even put holes in the print. Don't want to deal with it during the weekl, I only ge 5.5 hrs sleep as it is.by mfisch - Prusa i3 and variants
Actually, tried Repetier for a larger print and it had lots of errors and re-sends. Many unrecognized commands in the dialog, like 10 day 57? Both cura and slicr show the errors . I have a pi on order.by mfisch - Prusa i3 and variants
New 2020 i3 Build- the short and long of it. The short It's Alive!, needs tweaking. When all else fails threaten to sell it. The long for those starting a build - gotchas in Bold Receivefd Wed. 24 Aug - inventory, sort hardware Thur - assemble base Fri.-short day at work, real build commences Assemble platform and y bearings. Must have been psychic when I bought my first "real: Dremel a fewby mfisch - Prusa i3 and variants