I need help getting my new machine configured properly. Repetier 1.6.2 program settings. Thanksby MiniMfg - Prusa i3 and variants
I need someone to walk me through the configuration settings on this Prusa i3 m-505 A8 3D printer. As soon as I get one solid printed piece I will send 50 dollars to the person who helped me get it done. Someone REALLY knowledgeable please!by MiniMfg - Prusa i3 and variants
I'm including a photo worth a thousand words. Please see attached. How do i cure this issue? Thanksby MiniMfg - Prusa i3 and variants
Thanks for the suggestions. I went over the whole build again and found that I had the bed plugged into the socket on the board. I've got the machine working but other issues have arisen. I'm going to try a new post and hope for some timely help. Thanks again.by MiniMfg - Prusa i3 and variants
Is anyone out there willing to help?by MiniMfg - Prusa i3 and variants
Hi, Just finished assembling above name printer. I've worked my way through many issues but at this point I'm having issue with temps. I'm attempting to perform the very first print. When I hit Start print, The extruder temp begins to climb and I've let it go as high as 286. I'm really not sure if the screen is showing c degrees or F degrees. Anyway; even at 286 the bed temp hasn't yet moved.by MiniMfg - Prusa i3 and variants
Oh okay. Thanksby MiniMfg - Prusa i3 and variants
Okay. Since you mentioned the bed usually heats up first I tried again and paid attention to the bed temp. It didn't move. I'm thinking at this point maybe the extruder keeps rising because it doesn't shut off until the bed is at temp. Is this thought is correct? If yes, what should I do about it? Thanks, Tonyby MiniMfg - Prusa i3 and variants
First, Thank you for taking the time! I am referring to the extruder. The defaults in the printer section are set at 200c and 55c as specified in my instructions. There are no recommendations on the extruder settings. The instructions I have are not very good. What do you recommend for extruder settings? I'm trying to test with pla supplied with the printer. The rec. temp for which 175. Shoulby MiniMfg - Prusa i3 and variants
Sorry yes. I'm using repetier 1.0.6by MiniMfg - Prusa i3 and variants
Yes. At this point: When I hit Start print, the extruder moves all the way to the stop on the left and stays there. Then the temp starts to rise. Every time it hits 240 degrees which I think is too high I hit the emergency stop because I'm thinking it might burn out. It's my understanding the temp only need to be about 175. Am I wrong? Should I let it go and see what happens? BTW, I have a veryby MiniMfg - Prusa i3 and variants
I'm pretty sure you've heard this before. I just finished assembling a Prusa i3 M-505 and I have NO IDEA what to do now. My specific question at this point is how do I limit the movement of the extruder? When I try to anything it moves outside the bed parameters and below or actually hits, the bed. I can't get help from the sellers. They got their money and simply don't care. Any help would be gby MiniMfg - Prusa i3 and variants