Hey you were right! Thank you for the help!by Wrestler99 - Prusa i3 and variants
Hey I got it figured out and working. Thank you for your helpby Wrestler99 - Prusa i3 and variants
Here's the first 50 linesby Wrestler99 - Prusa i3 and variants
While using manual control the heated bed and extruder heat only to the temperature I tell them to. After slicing an object and hitting print, the bed heats up to the desired temp, 55 c, and just keeps going past till I get an error message around 115 degrees. It does not matter if I type in a different value for the bed temp or use the temp slider to change it, the bed continues to heat. My sby Wrestler99 - Prusa i3 and variants
Hey Nick, I have built one of your printers and am to the point where I am testing extrusion. I'm using Repetier host. The heated bed heats up past the temperature I set it to in manual control and the machine won't move to begin the print ( probably because the machine is waiting to hit some preset temp, but I don't know where that is ) Yesterday was the first time I tried to turn the heatedby Wrestler99 - Prusa i3 and variants
Sorry for the delay, but here is my configuration.h My Z feedrate is at 2 right now also I can move the Z_axis easy by turning the Z_axis couplersby Wrestler99 - Prusa i3 and variants
Sorry for the delay, but here is my configuration.h My Z feedrate is at 2 right now also I can move the Z_axis easy by turning the Z_axis couplersby Wrestler99 - Prusa i3 and variants
Hello everybody, I am a new user and have finished building a Prusa i3 printer. I have been able to home the X and Y axis but when ever I attempt to auto home the Z axis there's a loud squealing, the motors only turn about one rotation, then stop. I am not sure what I'm doing wrong. Here's my setup Arduino Mego 2560 with ramps 1.4 board Marlin firmware (newest version) Arduino software beingby Wrestler99 - Prusa i3 and variants