Quoteerniehatt When I am ready I will PM you. Thanks!by Esinem - Firmware - Marlin
Quoteerniehatt Hang in there Mate. I am sure things will come good eventually. I am still in the process of rebuilding my printer, waiting for bits and pieces to arrive from China, when it all comes I am sure we can work it together.. I do hope so but meanwhile I'm reverting to manual; levelling so at least I have a working printer and I won't personally fail the Sanity Checkby Esinem - Firmware - Marlin
I give up!by Esinem - Firmware - Marlin
No. It's totally beyond me. All it does is flash and it doesn't respond to any commands. I've just chased error after error but admittedly I don't have much of a clue what I'm doing. Unless anyone can give me a really easy explanation, I think I'm going to bin the 3D Touchby Esinem - Prusa i3 and variants
It's bloody confusing all the places you can set parameters and even how to work out what they are/wher you measure them fromby Esinem - Firmware - Marlin
You can share my pain in this thread:by Esinem - Prusa i3 and variants
The good news: Setting PROBE_BED_POSITION allowed it to upload. However, as I have no idea how to determine the parameters, they are undoubtedly wholly inaccurate. The bad news: The BL Touch opitions on the menu don't seem to do anything My printer homes to the middle of the bed and nowhere near the surface. It doesn't seem to print anything anymore I think I missed out on centering the printby Esinem - Firmware - Marlin
OK, I tried that but I still get an error compiling. This is the error: In file included from sketch\MarlinConfig.h:41:0, from sketch\G26_Mesh_Validation_Tool.cpp:27: SanityCheck.h:866: error: static assertion failed: LEFT_PROBE_BED_POSITION is outside the probe region. static_assert(LEFT_PROBE_BED_POSITION >= MIN_PROBE_X, "LEFT_PROBE_BED_POSITION is outside the probeby Esinem - Firmware - Marlin
Thank you, obewan. OK, endstops makes sense. However, I'm not sure how to work out the distance that the nozzle is away from the bed surface when the bltouch (It's actuall a 3dTouch but assume it's teh same?) triggers. Is that in mm? Not sure what signifies triggering or how best to measure it. Any suggestions? Will have a play meanwhile.by Esinem - Firmware - Marlin
I just tried again. This is the error I got: In file included from sketch\MarlinConfig.h:41:0, from sketch\G26_Mesh_Validation_Tool.cpp:27: SanityCheck.h:1202: error: #error "Enable USE_XMIN_PLUG when homing X to MIN." #error "Enable USE_XMIN_PLUG when homing X to MIN." ^ SanityCheck.h:866: error: static assertion failed: LEFT_PROBE_BED_POSITION is outside the prby Esinem - Firmware - Marlin
Let me start by saying I'm a not very technical newbie. I have a Tarantula which I finally managed to update Jim Brown's Tevo Tarantula easy config from GitHub. Even that was a struggle with my level of knowledge! My Tarantula is large bed with an MKS Gen L V1.0 board and LP fan duct. I have connected and mounted my 3DTouch, it seems to be responding and, on the plus side, it hasn't started smokby Esinem - Firmware - Marlin
Only expeiences of massive frustration! However, I put that down to my lack of knowledge. I have been failing to get mine to work with the (so-called) easy config for Tarantual Tevo by Jim Brown on GitHub. I'm sure it is easy if you have some clue what you are doing but I don't :-( Any assistance gratefully received. The best I achieved was it sitting about 7cm above the bed. From there, I was juby Esinem - Prusa i3 and variants